Seismic Design of Braced Steel Frames
Seismic behavior of a six-story, K-braced structure without backup ductile moment-resisting frames designed according to the current Uniform Building Code is studied in this paper. The...
The Effects of P-Delta and Semi-Rigid Connections on Response Behavior of Inelastic Steel Frames Subjected to Cyclic and Seismic Loadings
A numerical method is presented for analyzing semi-rigid connected steel frames subjected to various time-dependent excitations with consideration of damping, nonlinear material behavior...
Bidirectional Seismic Response of Simple Structures
For design purposes it has been common to consider that seismic excitations act in one direction at a time. Analytical studies over the past decade have indicated that this may not be...
Study of the Collapse of a Reinforced Concrete Model Structure Under Simulated Earthquake Motion
The collapse, under simulated earthquake motion, of a multistory r/c frame structure with columns flexurally weaker than beams (SBWC) is studied. A small-scale model, comprising parallel...
Water Project Design and Safety: Prospects for Use of Risk Analysis in Public Sector Organizations
After offering some initial definitions, the authors will describe a highly structured model of risk analysis and water resources decision making in the public sector. The primary emphasis...
Impacts of Risk-Based Analysis on Current Design Practices
A summary of hydrologic design standards used by selected federal agencies for the safety evaluation of dams is presented. A computational procedure is outlined to develop hydrologic design...
Microcomputer Application of the Florida Standard Urban Transportation Modeling Structure
Over the past five years the Florida Department of Transportation (FDOT), in conjunction with the twenty-one Florida Metropolitan Planning Organizations, has developed the Florida Standard...
Behavior of Concrete Bulkheads in Salt Drifts
Parameters studies of the behavior of a plug made from expansive concrete have been performed. Such plugs are now being field tested for sealing boreholes, shafts and drifts at an underground...
Delamination and Remedial Repair of GFRC Cladding Panels
The construction of a six story, steel framed office structure included an exterior cladding of prefabricated glass fiber reinforced concrete (GFRC) panels. The typical full-size panel...
The Basics of Water-Resistant Brick Walls
Water-resistant masonry walls of burned clay or shale brick are the result of a conscious effort to produce them, by everyone involved in their creation. Furthermore, owner maintenance...
The Assessment of Freeze-Thaw Damage in Cement Stabilised Soils
Whilst the ASTM Freeze-thaw test was not originally conceived as a means for classifying the frost resistance of cement stabilised soils it has become accepted for this purpose, with the...
Structural Monitoring Concepts for Arctic Pipelines
Terrain instabilities producing differential soil movements are the predominant features affecting the structural integrity and design of buried pipeline systems in the arctic. Current...
The Metropolitan Boston Area Earthquake Loss Study
This study develops an inventory of critical facilities in the Metropolitan Boston area and analyzes the impact of a project earthquake (Cape Ann Event) on their structural integrity and...
Structural Design of the Defense Waste Processing Facility
The Defense Waste Processing Facility (DWPF) is designed to process radioactive defense waste sludge and the radioactive nuclides, cesium and stronium, from the salt solution. These radioactive...
A Generic Design for On-Site Low Level Radioactive Waste Storage
This paper describes a generic design for an on-site low level radioactive waste storage facility. The generic design encompases the development of design criteria including an envelope...
Design of Impact Limiters for Waste Fuel Shipping Casks
Impact limiters are often used to control the decelerations experienced by a waste fuel shipping cask when it is subjected to the hypothetical accident condition loadings. Simplified design...
Simulation of Salt Behavior Using In Situ Response
This paper presents an improved method for simulating the salt behavior. In this method, the governing equations are normalized to the creep function, which represents the transient and...
A Cost Effective Quality Control Program for Commercial Construction
The construction industry recognizes the important need for a formalized quality control program to assure the safety of our structures. The successful program is one in which the owner,...
Structural Engineering for High Technology Clients
The unique requirements of the high tech industry provide interesting and fascinating challenges to the structural engineer of the 1980's. The following is a list of the most...
Design of High-Technology Facilities from the Vibration Standpoint
High-technology facilities, such as those used for the production of integrated circuits or for optics research, generally require extremely limited vibration environments. Suitable precautions...
Return to search