Full Scale Tests of Cladding Components
A full scale, six story, steel frame at the Building Research Institute, Tsukuba, Japan was constructed for a series of projects in the U. S. -Japan Cooperative Research Program. This...

System Identification Applied to Pseudo-Dynamic Test Data: A Treatment of Experimental Errors
A single-input single-output system identification technique, used to estimate the modal properties of a full-scale six-story steel structure tested within its elastic range by the pseudo-dynamic...

Adaptation of Modal Testing Procedure to Shaker Tables
This article presents a technique for adapting current modal testing procedures to shaker table tests commonly used for qualification tests of nuclear and space related equipment. It involves...

Problems of Spectral Analysis in Dispersion Tests
The use of dispersive surface waves and spectral analysis methods is new to the nondestructive testing of airfield pavements. Such tests are to determine whether mechanical properties...

Stiffness Parameters Identification of Frames
Four widely used methods of structural system identification are presented. A new formula and its derivation, based on the Bayesian estimation theory, is given. Time domain responses of...

Optimal Collection of Data for Parameter Identification
In this paper, the author attempts to study the optimal spacing of measurements for a structural system modelled by a single-degree-of-freedom oscillator so that the variance of one or...

Research Topics in Structural Identification
The authors examined a variety of possible research topics including identification and detection of nonlinearities, model improvement approaches, damage identification, power estimation...

A Discrete Model for the Estimation of the Elastic Abutment Stiffness
The purpose of this paper is the presentation of a simple method for the estimation of the abutment stiffness. In this method, the abutment is represented as a uniform rigid plate with...

Dynamic Soil-Structure Interaction for RC Lifelines
The behavior of buried cylinders merits attention because of the impact of lifeline survivability under earthquake effects, and failures may adversely affect many communities that employ...

Green's Function Implementation for Pile Analysis
This paper describes the implementation of a new Green's function based on a layer stiffness approach in a boundary element analysis of harmonically loaded pile groups embedded...

Soil-Structure Interaction on Structural Dynamics
The dynamic analysis of structures under the effect of soil-structure interaction and the effect of member axial force is based on the continuous mass matrix method, in which the equations...

Comparative Seismic Response of Damped Braced Frames
The behaviours of braced steel building frames with friction joints and with eccentric bracing, under seismic forces, are compared. Nonlinear time history dynamic analysis is used. Friction...

Modified Dynamic Condensation Method
This paper presents a modification of the Dynamic Condensation Method for the reduction or condensation of problems in structural dynamics. The proposed modification substantially reduces...

Effect of Seismic Wave Inclination on Structural Response
A new procedure is developed using the computer program SASSI to evaluate the effects of inclined propagating shear waves on three-dimensional seismic soil-structure interaction (SSI)...

Approximate Solutions for Layered Foundations
A simple approximation to the dynamic response of foundations resting on layered soil profiles is presented. The approximation is based on an equivalent radiation damping which is numerically...

Interaction Effects in Vertically Excited Steel Tanks
Following a brief review of the hydrodynamic effects induced by a vertical component of ground shaking in liquid-filled, circular, cylindrical, steel tanks that are rigidly supported at...

Modal Analysis of Random Vibration with Hysteresis
A model for the zero or non-zero mean random vibration response of hysteretic plane frames is summarized, in which the plane frame is idealized as a series of elastic sub-elements connected...

Random Vibration of Mass-Loaded Rectangular Plates
The classical method of separation of variables in conjunction with the Green's function of the vibrating plate is used to obtain the solution of the free vibration problem...

Dynamic Response Moments of Random Parametered Structures with Random Excitation
First and second order statistical response moments are formulated for linear multi-degree of freedom dynamical systems having both random load and random structural characteristics. A...

Stochastic Response for Tertiary Systems
A modal superposition method is presented for obtaining the response of a single-degree-of-freedom tertiary subsystem mounted on a primary-secondary system. The method is direct in that...

 

 

 

 

Return to search