Thermal Plumes from Staged Diffusers into a Uniform Quiescent Environment
The behavior of thermal plumes from staged multiport diffusers was investigated experimentally. The three-dimensional temperature distribution was measured by scanning thermistor rakes...
Flow Distribution in Multiple Channels with Partial Ice Coverage
It is not uncommon for rivers to have multiple channels. The distribution of the total flow to the individual channels depends on their relative hydraulic characteristics of depth, width...
A Computational Analysis of Dynamic Interaction of Dam with Reservoir Water and Sediment
A two-dimensional model of porous media is employed to calculate the reduction of the onset hydrodynamic pressure with the bulk modulus of pore water in reservoir sediment. However, the...
Uncertainty of Runoff Volume as a Function of Rainfall and Catchment Characteristics
The expected variability of runoff volume due to the uncertainties in spatial distribution of rainfall and catchment characteristics is quantified. A physically-based mathematical model...
Riprap Stability Results from Large Test Channel
Velocity data from a large test channel were used to determine the distribution of depth-averaged velocity and shear stress on the side slope of both straight and curved channels. From...
Scour in Non-Cohesive Beds at Culvert Outlets
An empirical relationship was developed to estimate the depth of scour in non-cohesive material at culvert outlets. The scour depth is expressed as a function of mean particle size of...
Introduction of Variational Principle Into Open Channel Hydrodynamics
Possible applications of the variational principle maximizing the entropy are illustrated. Open channel flow properties are expressed in terms of 'entropy parameter',...
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
A Regionalized Rainfall-Runoff Stochastic Model
The single area unit hydrograph model is used to develop a distribution model which accommodates the uncertainty in rainfall over the catchment. By categorizing the available rainfall...
Comparison of Correction Factor for Dispersion Coefficient Based on Entropy and Logarithmic Velocity Profiles
Recently, new velocity distribution equations have been developed by Chiu (1987, 1989) through the use of maximum entropy principle. A comparison will be made of the correction factor...
Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...
Pressure and Stress Distributions Due to a Submerged Impinging Jet
This investigation examines the pressure and shear stress distribution at a smooth planar boundary in the impingement region of a submerged vertical jet in water. The mean pressure and...
Physical Forces Generated by Barge-Tow Traffic Within a Navigable Waterway
Movement of navigation traffic such as barge tows within a restricted inland waterway such as the Illinois, Mississippi, or Ohio Rivers can and will alter the flow field in and around...
Flow Field Near an Inland Navigation Tow
As a vessel moves through a body of water, disturbances are created in the form of altered water levels such as waves or drawdown and altered flow fields such as increased velocities and...
The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...
Comparison of Flush and Chamber Mounted Dynamic Pressure Transducer
Modeling of hydraulic structures often includes the measurement of dynamic pressure fluctuations. The accuracy of the pressure measurements depends upon the geometry of the tap. Flush...
Coronarization of the Autonomous Water pump
The conventional hydraulic pressure multiplier has been successfully used by Belgian technician Robert Houman (1986) to provide a dependable source of water supply to the NATO-base at...
Model Study to Design a Small Intake
A 1:4 scale model was used to design the make-up water intake structure for Burrillville Combined-Cycle Power Plant, Ocean State Power Project. The objective of the study was to assure...
Characteristics of Flow Pressure Pulsation and Similitude Law of Model
As described in this paper, the characteristics of flow pressure pulsation and similitude law of model are derived from experiments on some prototype dam and serial scales models....
Advances in Pipeline Materials
Pipelines transport water, storm run-off, process wastes, petroleum, natural gas, slurries, solids, sewage, steam and other fluids either by gravity or under pressure. Pipelines are also...
Return to search