Hydraulic Research--U.S. Geological Survey
Research at the Gulf Coast Hydroscience Center near Bay St. Louis, Mississippi, is being conducted in an indoor laboratory, and an outdoor laboratory. Much of the current indoor lab research...
The Three Point Resection: An Alternate Method
When doing stadia or topographic surveying, it is not always economical or practical to establish the location of the transit or plane table via a field traverse. If three points of known...
Forensic Engineering: What Role for ASCE?
Responding to heightened concern within and without the American Society for Civil Engineers (ASCE) about failures of engineered structures and other works, ASCE formed two commitees to...
Urban Hydrology and Catchment Research in the United Kingdom - Progress Since 1979
The Wallingford Procedure for the design and analysis of urban drainage systems was released in late 1981 for use by drainage engineers in the United Kingdom. This was the most significant...
Journal of Surveying Engineering
The Journal of Surveying Engineering covers the broad spectrum of surveying and mapping activities encountered in modern practice. It includes traditional areas such as construction surveys, control surveys,...
How Well do P.E. Exams Relate to the Real World? NCEE Tries to Find Out
The National Council of Engineering Examiners (NCEE), the group which furnishes a standard liscensing exam for professional engineers used by almost every U.S. jurisdiction, has surveyed...
Surveying and Photogrammetry Research Needs
An ASCE-National Science Foundation committee listed and prioritized research needs in surveying and photogrammetry. Among them are the Department of Defense's Global Positioning...
Sanitary Sewer Design
Good sanitary sewer design practice requires evaluation of alternative locations, slopes and pipe sizes. However, cost considerations generally keep alternative evaluations to a minimum....
Engineering Schools Respond to Financial Crisis
A mail survey of the 200-plus civil engineering departments at engineering schools asked each chairman for a case history of response to the financial and other crises facing the departments....
ASCE Salary Survey 1981
This is the sixteenth report in a series of biennial salary surveys conducted by the American Society of Civil Engineers. Salary data is reported on seven major categories for civil engineers:...
The ABC'S (and Q) of Cold-Formed Steel Design
Cold-formed structural members are steel components that have been put into their cross-sectional shape by cold bending of flat sheets. Local compressive buckling must be carefully considered...
From Field to Map�Untouched by Human Hands
After a few years of experience with computerized surveying systems, surveyors are finding that increased efficiency and accuracy are justifying capital expenditures. Several users of...
Employee Appraisals: Define and Motivate High Standards of Performance
The committee on Engineering Management at the Individual Level (EMIL) conducted a survey of civil engineering consulting firms' employee appraisal programs. The purpose of...
Guide to Right-of-Way Survey Practices
Guidelines are described for right of way surveys with regard to properly executed research, field surveys, monumentation, platting and recording of plats, and descriptions by trained...
Surveying Takes Another Giant Step Forward
The introduction of short-range electronic distance measurement in 1971 revolutionized surveying. Thousands of surveying and engineering firms across the U.S. today routinely use EDM for...
Mapping America is Never-Ending Task for USGS
For its first topographic surveys, begun in 1879, USGS measured distances by counting revolutions of a wheel, ran traverses by chain and compass, and used a barometer to determine elevations....
Land-Use Planning: Grows More Exact with the Help of USGS
The U.S. Geological Survey has turned its considerable talents and resources towards providing earth-science information for urban planners and, consequently, developers. This article...
USGS Sharpening Water-Quality Management Tools
By 1983, the U.S. will have spent over $83 billion to upgrade treatment facilities to advanced waste treatment. Much of this furious effort will be in vain, won't produce...
Why Does a Federal Demonstration Project Succeed or Fail�
This is a condensed version of an article published in
How Can Construction Specifications Be Improved�
Construction costs could be cut perhaps 5% to 10% if specifications were improved, as the ASCE survey of contractors discloses. Spec writers must have had responsible field experience....
Return to search