Preliminary Engineering Design of an Artificial Tidal Lagoon System in Kuwait
A coastal resort project was planned for a 30 hectare site along the Arabian Gulf approximately 69 km south of Kuwait City at Dubaiyeh. The master plan, originally developed by Kuwait...
Polyhedric Surfaces
A new design for spillways is proposed. The basic idea is to substitute the traditional shape of the continuous vertical bends by polygonal plane surfaces. In this way it is possible to...
Hydraulic Design of Pamo Dam Spillway
The design of the emergency spillway for the San Diego County Water Authority's (SDCWA) proposed Pamo Dam is discussed. Pamo Dam is a 264-foot (80. 5 meter) high roller compacted...
Optimal Design of Large Scale Water Distribution Systems
This paper presents a methodology for the design of least cost water distribution systems. The advantage of the formulation compared to the other techniques in the literature is that it...
Scour Prevention at Bridge Piers
Laboratory experiments are described in which attempts are made to eliminate local scour at bridge piers using submerged vanes and pier collar. The submerged vanes direct bed load toward,...
Reinforcement of Steep Grassed Waterways
A collaborative research program has been undertaken in the UK to develop guidelines for the use of various proprietary reinforcement systems to enhance the erosion resistance of grass...
Design of Overtopping Protection for Small Dams
Many existing small embankment dams in the United States cannot safely pass current design floods without overtopping. In the past several years, embankment overtopping protection has...
Composite Resistance to Flow With an Ice Cover
Recent data collected on several rivers in Michigan suggest, with only an ice cover present, that Manning's roughness ratio is constant at n//R equals 0. 65. If other ice...
Dimensional Analyses of Yellow River Sediment Data
A contemporaneous set of bed load and suspended load sediment transport data were analysed for three hydrologic stations on the Yellow River. There were a total of 82 bed load events,...
Mississippi River Sediment Load and Regime Equations
Data collected by the Corps of Engineers were used to evaluate the interaction of such parameters as river slope, suspended sediment load, channel geometry, and river discharge. Calculations...
Hydraulic Model to Improve Debris-Handling Capability of Waterford Unit 3 Intake Canal
A 1:30 scale model was used to test the effectiveness of various modifications to the Waterford Unit No. 3 intake canal. The objective of the study was to assist in the development of...
Methods for Specification and Verification of Hydraulic Design in a Turnkey Construction Contract
The project site is at the Hannibal Locks and Dam at New Martinsville, West Virginia. The existing project, a Corps of Engineers' (Corps) facility built in the 60's...
Refined Modeling to Estimate Sediment Discharge
Numerical solution of the two-dimensional turbulent flow over a train of identical dunes is obtained with the Algebraic Stress Model for closure. The effective tractive force acting on...
Red River Pilot Channel Design and Development
This paper presents the design parameters for two pilot channels constructed on the Red River. The factors often associated with the development of pilot channels are identified in an...
Roughness Coefficients of Large Floods
Most hydraulic calculations of flow in channels and overbank areas require an evaluation of flow resistance generally expressed as Manning's roughness coefficient, n. Literature...
Non Linear Economic Models for Crop Production
Most economic models for crop production rely on the traditional linear programming approach, in spite of the fact that the objective function is almost always non linear. This paper briefly...
Hydrologic Design Criteria for Dams with Equal Reliability
Appropriateness of design criteria which require using the same Antecedent Moisture Condition (AMC) throughout Kansas for sizing dams and emergency spillways was examined. AMC values which...
A Simulation Procedure for On-Farm Irrigation Systems Planning
A simulation modeling package has been developed for modeling on-farm irrigation water supply and application systems. The modeling package can consider up to 6 different application systems...
Effective Precipitation in Irrigation Design and Management
Effective precipitation is important in irrigation system design and operation. Numerous methods for estimating effective precipitation have been proposed in the past, including direct...
Crop-Water Production Functions and System Design
A Task Committee to evaluate application of crop-water production functions to irrigation system design and management was established by the ASCE Irrigation Water Requirements Committee...
Return to search