Preliminary Dynamic Analyses of the Ministry of Agriculture Building
The Ministry of Agriculture building on Avenida San Antonio Abad was originally constructed as a 17 story reinforced concrete structure using a waffle slab system with interior reinforced...
Implications of Structural Characteristics on Failure
Performance of buildings with two common structural types, many of which suffered heavy structural damage or collapse, are analyzed. Conclusions are drawn that no structural type is inadequate,...
Observations on Structural Pounding
In over 40% of the collapsed or severely damaged buildings in Mexico City, pounding of adjacent buildings occurred, and in at least 15% was the primary cause of collapse. The main objectives...
R/C Frame Drift for 1985 Mexico Earthquake
This paper contains the results of a parametric study of the displacement response of multi-story reinforced concrete frames. Nonlinear lateral displacement responses were calculated for...
Evaluation of Performance of Concrete Buildings Damaged by the September 19, 1985 Mexico Earthquake
As a part of a general evaluation of the structural behavior of buildings during the 1985 earthquake in Mexico City, a detailed study of 8 damaged concrete buildings has been performed....
Behavior of Reinforced Concrete Framing Systems
On September 19, 1985, Mexico City was hit by what is believed to have been the most damaging earthquake in its recorded history. In this report, a ground motion recorded in the severely...
Performance of Steel Structures
A description of the various types of steel structures built in Mexico City is made, including comparisons of the older types of steel construction with more modern buildings. Performance...
Summary of the Effects of the 1985 Mexico Earthquake to Power and Industrial Facilities
A major industrial area and two power plants are near the epicenter of the Magnitude 8. 1 Mexico Earthquake of September 19, 1985. All investigated facilities are modern, generally well...
Seismic Rehabilitation: Why, When and How
Common methods of seismic rehabilitation are: repair of cracks, reconstruction of structural elements, addition of stiffening elements, and addition of dampers. A major consideration is...
Damage Assessment and Seismic Behaviour of Steel Buildings in Mexico City
Preliminary reports on the September 1985 earthquakes indicated 10 steel buildings collapsed and 2 more severely damaged. The total number of buildings found either collapsed or severely...
Repairing and Strengthening of Reinforced Concrete Buildings Damaged in the 1985 Mexico City Earthquake
This paper describes briefly the criteria and techniques used for the repairing and strengthening of reinforced concrete buildings damaged in Mexico City during the 1985 earthquakes. It...
Emergency Regulations and the New Building Code
The 1942 Federal District Building Code was crude and overoptimistic. The 1957 earthquake prompted the drafting of emergency regulations, modern and more realistic. They evolved into the...
Thoughts on a Different Approach to Seismic Design Codes
The aim of this paper is to show that some of the principles on which conventional structural design is based are not directly applicable to seismic design. Seismic design, and the corresponding...
Stopping Seepage
The Navajo Dam in New Mexico has major seepage problems. The Bureau of Reclamation, which owns the Dam, conducted studies, verified by outside consultants, concluding that the combination...
Transmission Structure Foundation Loads and Performance
Transmission line structures are subjected to unique loading conditions which for the majority of structures results in maximum loads which occur infrequently and act for only short periods...
Construction and Design of Foundations for French Overhead Power Transmission Network
This paper summarizes present conception and design of foundations for 90 to 400 kV overhead lines in France. Firstly principles of geotechnical studies in use are presented: various types...
High Capacity Multi-Helix Screw Anchors for Transmission Line Foundations
Three case history summaries are presented which discuss the siting, design, and construction of towers supported on multi-helix screw anchor foundations in the Virginia Power service...
Settlement of Residual Soils
The method previously suggested by the author in 1977 for calculating settlement of non-plastic to slightly plastic Piedmont Physiographic Region residual soils is reviewed. Additional...
Pressure Injected Footings in Piedmont Profiles
Comparatively little has been published on the behavior of pressure injected footings in the Piedmont residual soils and weathered rocks. It is the purpose of this paper to describe some...
Design of Drilled Piers in the Atlantic Piedmont
The philosophy and methods of drilled pier foundation design in the Atlantic Piedmont are described. Consideration is also given to the unique characteristics of decomposed metamorphic...
Return to search