Concrete Structures?1988 UBC Seismic Provisions
This paper discusses the special requirements in the 1988 edition of the Uniform Building Code concerning reinforced concrete structures resisting forces induced by earthquakes. The provisions...
1988 Provisions for Masonry Design
The 1988 Uniform Building Code has seen a significant change in the seismic design requirements, Chapter 23, for the design of structures subjected to earthquake loads. This paper discusses...
Seismic Safety Regulation of Existing Structures
Establishment of standards for seismic strengthening of existing buildings has been difficult since full compliance with current codes is generally too expensive. A general consensus has...
Historic Background of Seismic Construction in San Francisco
A seismic design and construction tradition has developed in California because of the unique experience with local earthquakes. After the 1906 earthquake and fire, building performance...
Equating Dynamic Analysis to Static Code Provisions
Building codes generally prescribe seismic design provisions that include a static lateral force procedure that can easily be combined with the gravity loads to design the structural elements....
Development of Inelastic Reduction Factors to Provide an Elastic Design Procedure
R factor values can only be rationally selected when they are based on in part nonlinear inelastic dynamic analyses of building system types. However, it is informative to discuss the...
1988 SEAOC and UBC Seismic Provisions
This paper highlights the major improvements to seismic design provisions incorporated in the 1988 Structural Engineers Association of California (SEAOC) 'Blue Book'...
Recent Developments in Isolation Hardware
Most isolation systems have at least two physical components: one specifically intended to add flexibility and the other to control the resulting deflections. However, other elements may...
SDOF Structural Response Model Accounting for SSI
This paper outlines the theory associated with single-degree-of-freedom (SDOF) structural response models which account for soil-structure interaction (SSI) and evaluates the performance...
Cracking the Fire Code
Local building codes specify fire resistance for members in buildings and other structures, and structural engineers select materials and assemblies that have passed a standard fire resistance...
The Church on Stilts
Christ Church Cathedral is an Anglican church situated in the heart of downtown Montreal. Constructed in 1859, it is a perfect example of English neogothic architecture, characterized...
The Model Cleanup
Standards for hazardous waste site cleanups may be inappropriate or inadequate to protect the public health. Civil engineers responsible for remediation decisions need to know about the...
Structures for Enhanced Safety and Physical Security
This book presents the state-of-the-art in the general subject of structures for enhanced safety and physical security. The technical papers written are by engineers and researchers who...
Tension Leg Platform
a State of the Art Review
Prepared by the Task Group on Compliant Offshore Platforms of ASCE. This report considers the analysis and design of tension leg platforms (TLPs),...
Foundations on Expansive Soils in Northern Virginia
Thick layers of clayey silts (MH) were observed at several sites where townhouse developments were planned. These deposits had a high shrink swell potential. Maximum swell pressure tests...
Numerical Modeling of Interface Behavior for Drilled Shaft Foundations Under Generalized Loading
To evaluate soil-foundation interaction numerically, an isoparametric thin layer element is used within a 3-D, material nonlinear, general purpose geotechnical analysis system developed...
Subgrade Models for Soil-Structure Interaction Analysis
Historical development of improvements to Winkler's spring subgrade model are traced. The improvements consist of various ways to provide shear coupling between the springs....
Beams on Elastic Foundations: A New Approach
Using the Vlasov model, Vallabhan and Das have developed an effective iterative technique to solve the beam-on-elastic-foundation problem where the soil is assumed to have a uniform thickness...
A Geotechnical Analysis System with Applications for Drilled Shaft Foundations
The development and components of a geotechnical analysis system are described and illustrated for drilled shaft foundations. This finite element-based analysis system incorporates several...
Ultimate Capacity of Deep Foundation by a Rigid-Plastic Analysis
This paper is concerned with the determination of the axial ultimate capacity of a rigid pier on the basis of the theory of perfect plasticity. As an application of the upper bound theorem...
Return to search