Lateral Loading Curves from Pressuremeter Tests
The large drilled shafts for the proposed Klamath Falls Bridge, which are to be founded in diatomaceous silts, were to be designed to withstand earthquake induced large cyclic loading....
The Hazard In Using Probabilistic Seismic Hazard Analysis
Probabilistic seismic hazard analysis has been used extensively for major dams; nuclear power plants; liquefied petroleum gas installations; repositories for dangerous wastes; sensitive...
Seismic Remediation for Earth Dams
Over the last 30 years or so, new analysis methods and case histories of dam performance in earthquakes have significantly changed our understanding of the severity of the earthquake hazard...
Service Records of Chicago District Breakwater Stone and How These Relate to Test Results
Breakwater stone production is limited to areas with geologic outcrops capable of producing large rocks. The most reliable breakwater stone is that which exhibits the highest degree of...
Producing Armourstone Within Aggregate Quarries
This paper discusses a series of full-scale trial blasts which was conducted in an aggregate producing quarry with the objective of improving yields of armourstone. The quantitative research...
Some Case Histories of Armor Stone Production
The blasting techniques used to produce armor stone, derrick stone, and underlayer stone [one to twenty tons] for the construction of rubblemound breakwalls and the confined Dike Disposal...
Recent Experience With Armor Stone Cracking in the Buffalo District
Accelerated deterioration of large armor stone on the Cleveland East Breakwater, Cleveland, Ohio has resulted in the need for more intensive monitoring of the entire armor stone production...
The Durability of Rubble Mound Armour in Service ? A Case Study
Over the past decade, the ongoing monitoring of Gold Coast rubble mound structures in service has demonstrated a serious loss of durability over a period of time in the rock units after...
Behavior of Urugua-I Dam
URUGUA-I with its 76 m height is one of the higher lean roller compacted concrete dams. The project includes some outstanding features like the very low cement content and a PVC membrane...
Thermal Analysis for RCC?A Practical Approach
Roller compacted concrete (RCC) structures, by nature of the construction method, tend to be monolithic structures or structures with minimal contraction jointing. Recurring questions...
Final Design and Construction of Gibraltar Dam Strengthening
The results of a 1983 safety evaluation of Gibraltar Dam indicated that the dam did not meet seismic safety standards. A remedial scheme involving the addition of a roller compacted concrete...
Seismically Safe, Spectator-Friendly
As 50,000 frightened spectators at Candlestick Park can attest, the Loma Prieta earthquake in 1989 provided chilling evidence of the importance of seismic design in public structures....
Study of Three Dimensional Crack Tip Location of Mortar by Acoustic Emission
Plain mortar specimens were tested under three-point bending. Experimental variables include the width of the specimen and the notch-to-depth ratio. The experimental results of 12 specimens...
On the Influence of Seismically Induced Residual Forces on Bridge Abutment Design
The seismic design of bridge abutments depend on the anticipated movement of the abutment during the design earthquake. For seat-type abutments in which the backfill resistance can be...
Analytical Studies on the Seismic Response of Lead Rubber Base Isolated Bridges
Highlights of a study related to the response of base isolated bridges are presented. Four different analytical models are developed and used to evaluate the response of base isolated...
Seismic Wave Propagation by Finite Differences on the Connection Machine
Seismic modeling represents a difficult numerical challenge and consumes a significant amount of CPU time on the largest available supercomputers. With the advent of massively-parallel...
Experimental Determination of the Relation Between the Damaged Zone and the Aggregate Size in Concrete Through Acoustic and Mechanical Techniques
The size of aggregates in concrete has an influence on the behavior of the material. The width of the localized band can be related to this characteristic. Different experimental techniques...
Stress Transfer Within Granular Geomaterials
Local stresses within granular materials are random variables whose variance depends on the size of the elementary surface considered. This paper shows that this 'mechanical scale effect'...
Size, Temperature and Rate Effects on the Fracture Toughness of Saline Ice
This paper presents the results of an extensive experimental study performed with the aim of investigating the effects of temperature, size and loading rate on the fracture toughness of...
Dynamic Analysis of Sliding Seismic Isolators
The friction pendulum system (FPS) sliding seismic isolators are being used for the seismic isolation rehabilitation of the U.S. Court of Appeals Building, San Fransisco. This paper will...
Return to search