Preparing for the Big One
This paper presents a few examples of back-end and front-end implementation of disaster mitigation strategies being undertaken in various parts of the world. These examples illustrate...
Direct Causes of the Catastrophe
This chapter examines direct physical causes of the hurricane protection system failures, including soil strength assessments and pumping station limitations....
Structural Condition Assessment
In Structural Condition Assessment, editor-in-chief Robert Ratay gathers together the leading people in the field to produce the first unified resource on all aspects of structural condition...
Concrete Biaxial Column: Composite Circular Column
This chapter discusses the tabulation of composite circular column data in Microsoft Excel....
LRFD Compared to Working Strength Loads: Introduction
This chapter introduces the subject of load resistance factor design as compared to working strength loads....
LRFD Compared to Working Strength Loads
This chapter contains examples used to demonstrate the design of footings to resist seismic loads....
Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...
On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...
A More Perfect Union
Established to promote greater public understanding of the United States Constitution, the National Constitution Center facility in Philadelphia is a structure of complex geometries articulated...
Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...
Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...
Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...
Reengineering the Mississippi
For nearly a century, the Mississippi River Delta has been shrinking at a catastrophic rate. Civil engineers will play a major role in the multidisciplinary effort needed to reverse the...
Evaluation of Anchor Wall Systems' Landmark Reinforced Soil Wall System
With T.C. Mirafi's Miragrid & Miratex Geogrid Reinforcement ?Final Report
This report describes a HITEC evaluation designed to determine the basic capability and limitations of the Landmark/Mirafi System for use as a technically viable precast MSE retaining...
Use of Coal Combustion By-Products as Low-Permeability Liners for Manure Storage Facilities
This chapter presents an overview of the use of compacted flue gas desulfurization (FGD) material as a low-permeability liner. It discusses the engineering characteristics of FGD materials...
Building the Olivenhain
Engineers in California were hired to create a reservoir capable of providing the San Diego region with 24,000 acre-feet of water during an emergency shortage. The result is the Olivenhain...
Lessons Learned from Experience Dealing with Risks of Extreme Events: Part I
The five speakers in this session talked about a wide variety of topics, including schedule dependencies in hurricane preparedness, knowledge mapping across networks, extreme events in...
Lesssons Learned from Experience Dealing with Risks of Extreme Events: Part II
For every known IS vulnerability, there is a matching countermeasure. However, we do not know all IS vulnerabilities. The following tasks are geared towards identifying IS vulnerabilities,...
Development of Transportation Engineering Research, Education, and Practice in a Changing Civil Engineering World
Transportation has been one of the essential areas within civil engineering since its early days. In commemoration of the 150th anniversary of ASCE, this paper presents a review of developments...
Cementitious Materials�Nine Millennia and A New Century: Past, Present, and Future
Cementitious materials have been used in construction for several millennia and through several civilizations. Their use has been revitalized in the recent century, and they have become...
Return to search