A New Three-Dimensional Modeling Technique for Studying Porous Media
A new three-dimensional technique for modeling the micro-structure of porous media is proposed. On the basis of measurements of characteristics made using thin sections of porous media...
Evaluation of Runway Roughness for Fighter Jets
A new roughness evaluation procedure is needed, especially, when dealing with modern fighter jets. To this end, a comprehensive pilot attitude survey was conducted in Israel in order to...
Stress Transfer Within Granular Geomaterials
Local stresses within granular materials are random variables whose variance depends on the size of the elementary surface considered. This paper shows that this 'mechanical scale effect'...
Nonlinear Behaviour of Schneebeli Packings
We present some experimental proofs of the influence of the disorder of contacts on the mechanical (non-local) behaviour of packings of cylinders. In particular, this disorder is responsible...
Cylindrical Shell Redesign by Large Admissible Perturbations
Redesign (or inverse design) is the problem of defining an objective structural State S2 from its specifications and the known baseline State S1. The large admissible perturbations approach...
Nonlinear Geometric and Material Considerations in Shell Structures
A geometrically and materially nonlinear static shell theory allowing large displacements, rotations, and strains with parabolic shear is developed. The theory is cast into a total Lagrangian...
Systolic Anterior Motion of the Mitral Valve: In Vitro Flow Studies
Using an in-vitro approach, the goal of this study was to determine and to characterize the mechanism of systolic anterior motion of the mitral valve in obstructive hypertrophic cardiomyopathy....
Characteristics of High-Speed Runway Exits for Airport Design
This paper addresses some of the geometric design and operational characteristics of high-speed runway exists. Lateral and longitudinal runway constraints limiting the use of high-speed...
A Stochastic Approach to the Fatigue Reliability
In this paper, the stochastic approach, which combines the mixed boundary integral equation method (Lua et al (1992a)) with the First Order Reliability Method (FORM), is applied to study...
Computer-Assisted Geometric and Kinematic Analysis of Subsurface Faulting in the Vicinity of Yucca Mountain, Nevada, Using Balanced Geologic Cross Sections
Computer-assisted geological cross section balancing methods are used in the geometric and kinematic analysis of subsurface structures in the vicinity of Yucca Mountain, Nevada, including...
Effect of Camera Geometry on Thermographs for Pavement Crack Detection
The research focused on the effects of camera heights and tilt angles on the ability to detect cracks in thermographs obtained with an infrared camera. Results indicate that differences...
p-Version Three Dimensional Curved Shell Element for Geometrically Nonlinear Behavior
This paper presents a p-version hierarchical geometrically nonlinear formulation based on the total Lagrangian approach for a nine node three dimensional curved shell element. The element...
Nonlinearities and Imperfections in Creep Stability
The effects of material and geometric nonlinearities and imperfections on the 'safe-load-limit' and the 'safe-service-period' of structures...
Non-Linear Passive Elastic Properties of the Left Ventricular Myocardium: Application of Finite Element Analysis to 3-D Geometry Obtained from Ultrasound Images
A finite element (FE) analysis and an optimization algorithm were employed to assess the nonlinear passive elastic properties of left ventricular myocardium in a canine mode. The three-dimensional...
Effect of Stenotic Geometry on Blood Flow Behavior
The dynamic characteristics of the blood flow is affected by the area reduction of stenosis. To estimate the severity of stenosis, the information about the geometry should also be accounted....
Biomechanics of Local Articular Incongruities
Abnormalities of intra-articular contact near sites of local surface incongruity are frequently associated with secondary osteoarthrosis. We here review a series of experimental and computational...
Crack Growth Stability in Ice
The mechanics of stable, time dependent crack growth as a function of geometry and increasing crack length in saline an freshwater columnar ice are examined in this paper. Experimental...
Geometry of Yield Surfaces for Frictional Flow of Granular Materials
In the frictional flow regime, the discrete particles which compose of granular material roll or slide over one another, maintaining essentially continuous contact. Many theorists, including...
Analysis of Geometric Mispositioning in a Vertical Pile Group
A straightforward procedure is described whereby an approximate, three-dimensional, nonlinear model for the analysis of pile groups is used to simulate errors in major group parameters...
Development of a New Hydraulic Design Tool for Spiral Casing/Distributor Geometry
A novel computational model has been developed to predict highly complex turbulent flow in a combined spiral casing/distributor geometry. Validation of the computational model against...
Return to search