Test Experience with Heavy Angle Dead End Lattice Transmission Towers
During the past three years, the Electric Power Research Institute's Transmission Line Mechanical Research Center has conducted full scale tests on three 500kV heavy angle dead end lattice...
Response of Stressed Timber T - and Box-Beam Bridges
The objective of this study is to establish the strength, stiffness, and transverse load distribution factors of stressed timber T-, Bulk T-, and Box-beam bridge systems. To achieve the...
Time-Dependent Load-Distribution Behavior of Parallel-Member Wood Systems
The effect of differential member creep on the load-distribution behavior of parallel-member wood systems is examined. Variability in the creep response of the individual component members...
Assessing Effects for Disposal Sites off San Francisco
A simple particle tracking model has been used to estimate the size of deposition footprints and transient turbidity effects in the water column resulting from disposal of dredged material...
Sensitivity of Great Lakes Forecasting System Nowcasts to Meteorological Fields and Model Parameters
The Great Lakes Forecasting System is being developed by the NOAA Great Lakes Environmental Research Laboratory and Ohio State University. It uses meteorological fields as input to a numerical...
Propagation of Linear Gravity Waves Over Slowly Varying Depth and Currents
A detailed derivation of some kinematic and dynamic properties linear surface gravity waves-current interaction. The obtained expressions, which are exact within the framework of linear...
Joint Probability Distribution of Rainfall Intensity and Duration
Intensity-duration-frequency (IDF) curves are widely used for peak discharge estimation in designing hydraulic structures. Accurate interpolated and extrapolated intensity values are difficult...
Willingness-to-Pay for Alternative Shortage Probability Distributions
Mathematical programming is used to derive estimates of the willingness-to-pay of water service customers for improvements in water supply reliability. Reliability is represented as a...
Homogeneity Tests Based Upon Gumbel Distribution
This paper analyzes the performance of three homogeneity tests for Gumbel distributed flood flows. The classic Dalrymple test, a method-of-moment Cv test, and a normalized-quantile test...
A Regional Model of Daily Streamflow for the Northeast United States
A regional flow duration curve (FDC) model is under development which relates daily streamflow at 166 unregulated basins in the northeastern U.S. to watershed and climatic characteristics....
A Computational Algorithm for Analysis of Rectangular Footings Under Partial Contact with Soil
This paper describes a method to determine the distribution of base pressures under a rectangular footing experiencing partial contact of the footing with soil. Assuming the footing to...
A Flexible Structural Analysis Method for Computer-Aided Preliminary Design
This paper presents a new method for supporting structural analysis during preliminary design stage that is based on Gere's idea of 'moment distribution'. The extension is that in this...
Model Tests on Caissons
Laboratory tests were conducted on model caissons to better understand the settlement/deflection behavior of open ended caissons on sandy soil, with embedment depth, caisson diameter,...
When and How Can You Specify a Probability Distribution When You Don't Know Much?
This paper presents an excerpt from the proceedings of the above-named workshop, and gives an overview of both the workshop and the proceedings. Five papers with diverse and complementary...
Subjective De-Biasing of Data Sets: A Bayesian Approach
In this paper, we examine the relevance of data sets (for instance, of past incidents) for risk management decisions when there are reasons to believe that all types of incidents have...
Developments in Risk Analysis Commercial Software
There has been a marked increase in the number and type of commercial software packages available to support risk and uncertainty analysis. Monte Carlo simulations, the first such tool,...
Waste Minimization and Recycling by Microfiltration during Nitrocellulose Manufacturing
A plant survey was conducted to determine the amount of nitrocellulose (NC) discharged with process water from each of five sequential NC purification processes. Wastewater samples were...
Laboratory and Field Evaluation of Acoustic Velocity Meters
A project is currently underway to evaluate the performance of 27 acoustic flowmeters used at Hoover, Davis, and Parker Dams on the lower Colorado River. Field surveys and laboratory testing...
Response of Velocity and Turbulence to Abrupt Changes from Smooth to Rough Beds in Open-channel Flows
Response of velocity distribution and turbulence characteristics to abrupt changes of bed roughness have been investigated experimentally with two-component laser Doppler anemometer (LDA)....
Optical Methods for Sediment-Laden Flows
A method of distinguishing between the signals from the liquid-seed particles and sediment particles, while using LDV in sediment-laden flows, is described. The validity of the method...
Return to search