Retrofitting Storm Water Facilities for Quantity and Quality Control
Historically, urban storm water detention facilities in the U.S. were first designed, constructed and operated for the single purpose of urban flood control. In the second phase, recreation...

A Storm Water Utility Case Study, Salt Lake City, Utah
In response to financial pressure on the City's general fund and the EPA's storm water regulations, Salt Lake City went through the process of developing and implementing a storm water...

Reservoir Water Quality Modeling in Northern Portugal?Some Case Studies
In the last two decades environmental problems have become a major concern in Portugal as the effects of water pollution have gradually impaired the quality of water resources. Mathematical...

Hillsboro Basin Surface Water Management Model
This study presents the results of the hydrologic and hydraulic analysis of the 103-square mile Hillsboro Basin located in South Florida. The purposes of the project were to develop a...

Identifying the Critical Path and Building Coalitions for Restoring Degraded Areas of the Great Lakes
Since 1985, eight Great Lakes States, the Province of Ontario, and the governments of Canada and the United States have led the development and implementation of remedial action plans...

Use of Contaminant Mobility and Transport Parameters to Determine Water Testing Protocol
By 1994, EPA plans to regulate 83 contaminants in public water supplies. For rural communities and individuals who are not classified as public systems, the cost to monitor all 83 contaminants...

BRASS Modeling of Lo?za Reservoir, Puerto Rico, for Sediment Management Operations
Loiza reservoir, the principal water supply for metropolitan San Juan, delivers 3.5 m3/s (80 mgd) to the Sergio Cuevas filter plant. Sedimentation...

Statewide NPS Management Strategies
Statewide nonpoint source (NPS) management strategies are necessary because there are several different levels of authority involved, and the priority of action needs to be related to...

Expert System for Operating A Treated Water Supply System
This paper presents a systematic approach to the development of an expert system to operate a treated water supply system for meeting daily water requirements. A treated water supply system...

A TVD MacCormack Method for Open Water Hydraulics and Transport

Water Quality and Hydrologic Characteristics of a Wet Detention Pond
A small wet detention pond was instrumented to determine treatment efficiencies. Annual loads showed a reduction from the inflow to the outflow for ammonia as nitrogen (39%), organic nitrogen...

The Potential Fate of Particulate Contaminants from the Rehabilitated Ranger Uranium Mine
In the initial period after rehabilitation of the Ranger Uranium Mine most particulate matter released into Magela Creek will be wash load. 10% of the annual deposits on the backwater...

Computing in Civil Engineering and Geographic Information Systems Symposium
This proceedings consists of the papers presented at the Eighth National Conference on Computing in Civil Engineering and Geographic Information Symposium, held in conjunction with A/E/C...

Engineering, Construction, and Operations in Space III
This proceedings, Engineering, Construction and Operations in Space III, consists of over 200 papers presented at Space '92, the...

Reuse Rules
Cities that discharge sewage effluent to surface water are under increasing pressure to reduce concentrations of heavy metals, ammonium and nitrate, and substances such as toxic organic...

Overview of Permeable Bases
Drainable pavement systems consist of: permeable base, separator lyer, and edgegrain system. This paper focuses on permable bases. A permeable base must provide both permeability and stability....

Implementation of Material Requirements in Specifications
This paper focuses on where to find information on materials, their compatibility, minimum standards and specifying of materials and their use. The paper also presents case histories on...

Polyolefin Plastic Water Service Line Performance
Polyolefin (PO) plastic piping made from polyethylene (PE) and polybutylene (PB) materials have been used in diameters of about 1 in. for water service lines for buildings. Both PE and...

Probabilistic Mechanics and Structural and Geotechnical Reliability
This proceedings consists of summary papers for the thirty-six technical sessions of the 6th ASCE Specialty Conference on Probabilistic Mechanics, and Structural and Geotechnical Reliability....

Estuarine and Coastal Modeling
This is the proceedings of the second ASCE specialty conference on Estuarine and Coastal Modeling devoted to the rapidly evolving field of marine environmental modeling. The primary focus...

 

 

 

 

Return to search