Enhancing Highway Safety Through 3R Construction
The safety improvement programs specifically aimed at correcting high accident locations (HALs) are certainly helpful. These programs have resulted in sizeable frequency as well as severity...
Non-Freeway Programwide 3R Accident Analysis: New York
The New York Program for restoration, rehabilitation and resurfacing (3R's) has relied on broad scoped projects and case-by-case consideration of exceptions to design standards...
Assessment of Safety Impacts of Highway Projects
In this paper the safety impact of highway improvement and maintenance activities is examined in terms of accident reduction potentials of these activities. There are three causes of accident:...
RRR Design Standards: Cost-Effectiveness Issues
The Transportation Research Board study of geometric design standards for RRR projects is currently trying to match the logic of cost-effectiveness to the mostly judgmental process of...
Delineation Effectiveness for Alcohol Involved Accidents
The approach to the problem of the alcohol impaired drivers to date has been directed at driver education and increased police enforcement. A complementary and parallel approach is presented...
Sighting Safety
This paper examines the interrelation between drivers' visual needs and the road environment. Specific elements of visual limitation and drivers at greatest risk are identified....
An Analysis of Traffic Signal Safety Improvements
Identifying high accident rate locations and determining that they have an overrepresented type or pattern of accidents is an important first step in the safety improvement process. However,...
Location and Development of Safety Projects
Projects to be considered for inclusion in the Highway Safety Improvement Program (HSIP) must be part of a prioritized listing in which each project is based on accident experience or...
Evaluation?A Key to Safer Design Standards
Public highways are designed and constructed in accordance with established standards which have been developed over the years as a result of research studies or developed by committees...
New Techniques in Forced Vibration Testing
Forced vibration testing is a well established technique as indicated by references 1 to 8. This paper describes a system for forced vibration testing developed over two years during work...
Frequency Domain Analysis of a Tank-Soil System
The dynamic response of an elastic cylindrical tank supported on a rigid base under a harmonic vertical excitation is analyzed taking into consideration its interaction with the foundation...
Back on a Full Speed Track
A $30 million rehabilitation project is transforming a Massachusetts rail line that shows its age and poor maintenance history. Rehabilitating the line from Bristol County, Mass. to Hyannis...
Sequential Earthquake Response of an Earth Dam
Sequential earthquake-response records of the well-instrumented Long Valley earth dam (Mammoth Lake area in California) are analyzed and engineering interpretations are made. The dam,...
Importance of Phasing of Strong Ground Motion in the Estimation of Structural Response
In this paper, the influence on Fourier phase spectrum of seismic source directivity due to rupture propagation along the earthquake source is investigated. The phasing is described using...
Evaluation of Building Response Recorded During the Morgan Hill Earthquake
On April 24, 1984, the Morgan Hill Earthquake (Richter magnitude 6. 2) occurred within approximately 15 km of IBM Corporation's computer-equipment manufacturing facility located...
Dynamics of Fender and Rack Systems for Docking Ferries
A dynamic analysis of a ferry fender and rack system is developed based on the conservation of energy principle and Newton's laws of motion. The dynamics of the interaction...
A Critical Look at Building Instrumentation in Earthquake Engineering
This paper discusses different issues and requirements existing in the area of building instrumentation. Strategies and types of equipment currently being used by the United States Geological...
Dynamic Testing of Structures Using the RESCUE Technique
This paper describes the most recent phase of an NSF supported program at SRI International to develop the technique of repeatable earth shaking by controlled underground expansion (RESCUE)...
Seismic Tests of Friction Damped Steel Frames
This paper presents the results obtained from qualification tests of a new friction damping system, which has been proposed in order to improve the response of Moment Resisting Frames...
Nonlinear Behavior of Precast Concrete Shear Walls under Simulated Earthquake Loading
This paper presents experimental and analytical results on precast concrete shear walls under earthquake loading. It was observed in both small scale models tested and the computer analysis...
Return to search