On Aseismic Hybrid Control System
One type of hybrid control system is proposed for protecting tall buildings subjected to strong earthquakes. The hybrid system consists of a base isolation system connected to either a...
Serviceability of San Francisco Auxiliary Water Supply System
A method is developed for estimating the seismic serviceability of water supply systems. The method can account for uncertainties in earthquake, mechanical properties of soil and pipelines,...
Development of Fragility Curves for Liquefaction
The purpose of this study is to propose a methodology for evaluation of the degree of liquefaction potential and to demonstrate its applicability in constructing fragility curves for liquefaction...
Analysis of Earthquake Response at a Site With Uncertain Properties
The problem of earthquake response of a soil deposit with uncertain properties is studied in the paper. Various analysis procedures for handling the dynamic response of an uncertain system...
Identification of Seismic Waves for a Nonstationary Load Model from Strong Motion Records
Strong motion records of 5 moderate to strong earthquakes with different source mechanisms are investigated by Evolutionary Spectra Analysis. Only earthquakes with strong motion stations...
A Stochastic Clustering Model for the Occurrence of Large Earthquakes Along the Central Peruvian Margin
A stochastic model of a process of cluster centers and subsidiary cluster member processes is presented for the occurrence of large earthquakes along the Central Peruvian Margin. In the...
Earthquake Clustering in the Kanto District
Earthquakes in the Kanto district (Japan) between January 1983 and March 1987 are analysed for the identification of independent main shocks and for the hierarchical clustering of secondary...
Earthquake Ground Motions Consistent with Probabilistic Seismic Hazard Analysis
The present study deals with the new methodology for simulation of earthquake ground motion for the probabilistic risk assessment (PRA) of structures. Peak ground acceleration, acceleration...
Seismic Vulnerability Data and Optimum Allocation of Resources for Risk Reduction
The problem of reducing the seismic risk of existing buildings is tackled, and the most convenient strategies to be followed in planning upgrading interventions are discussed. After summarizing...
The Application of Reliability Based Design for Earthquake Resistant Communications Structures
Current earthquake design criteria consists of applying equivalent lateral static forces embodied in design codes. The structures designed in conformance with such provisions and principles...
Earthquake Energy Partitioning in Base Isolated and Dynamically Damped Structures
New earthquake energy spectra are proposed for practical design procedures using energy concepts. The spectra show integrated earthquake input energy of a unit mass with given natural...
Design of Buildings Under Earthquake Loadings Using Three-Stage Friction-Grip Elements
A simple method is given for the design of earthquake resistant buildings using three-stage friction-grip elements. Predesign is done by static analysis and verification is performed by...
Safety Improvement of Earthquake Loaded Structures Application of Semi-Active Control in Multi-Storey Buildings
This paper presents the studies for development of a new concept of aseismic design of structures. Basis of that engineering will be a structural optimization including elastic supported...
A Geophysical Model for Earthquake Hazard Estimation
A method for site hazard estimation from subduction earthquake is developed by combining a time-dependent earthquake occurrence model and a ground motion model into a unified hazard model....
A Study of Seismic Reliability of Base Isolated Building Comparing with Non Base Isolated Building
An approach to discuss the difference between reliability of base-isolated buildings and that of non base-isolated buildings is presented. The fragility analysis method in PRA procedure...
Structural Failure Probabilities of the HDR-Containment Under Earthquake Loading
A computational procedure for the evaluation of structural failure probabilities due to earthquake loading is developed. Uncertainties in structural and material parameters are taken into...
Analysis of Nonstationary Random Vibrations
Nonstationary random vibrations occur in structural mechanics as well as in vehicle dynamics. Very often the nonstationary excitation process can be modelled as stationary white or colored...
Random Vibrations of Discrete and Continuous Inelastic Structures
Nonstationary random vibrations of elasto-plastic cantilever beams excited by earthquakes are studied, where a finite spread of inelastic zones is taken into account. Following a complete...
Response Variability of Isolated Structure Due to Randomness of Isolation Devices
Effect of randomness of restoring characteristics of an isolation device, which is considered to result from the randomness of material properties, configuration and setting error, on...
Statistical System Identification of Structures
A general unifying approach to system identification is presented within a Bayesian statistical framework to explicitly treat the inherent uncertainties. It is shown that selecting the...
Return to search