A Test Method to Evaluate Shrinkage Cracking of Concrete
The possibility of shrinkage for a given drying environment depends on the following factors: free shrinkage, creep, and age-dependent properties of concrete. A common way to account for...
A Prestressed Kevlar/FRP Structural System
The strength/stiffness characteristics of a new lightweight composite structural system have been investigated in this study. The proposed system is constructed of FRP(E-glass/isophthalic...
Durability of Fly Ash Concrete in the Marine Environment
This paper presents the experimental investigation of durability of air-entrained fly ash concrete in the marine environment. The findings indicate that the deterioration rate of durability...
A Comparison of Straight and Circular Fibers for Concrete
Two previous studies of concrete reinforced with closed loop fibers are reviewed. Statistical moments of fiber systems are derived, including the expected values of the fiber embedment...
Properties of a New Polymer Concrete
A new polymer concrete was developed by adding unsaturated polyester resin and emulsifier into concrete. The new polymer concrete exhibits high strength of up to 69 MPa (10,000 psi) for...
Aggregates, Fibers and Coupling Agent in Polyester PC
This study investigated the influence of fine aggregate, glass fiber and silane coupling agent on the mechanical and mode I fracture behavior of a polyester polymer concrete (PC). The...
Beam-To-Column Connections for Pultruded FRP Structures
Moment-rotation and strength characteristics of beam-to-column bolted connections of fiber reinforced plastic (FRP) pultruded wide-flange structural shapes are discussed. Results of experimental...
Load-Deflection Performance of FRP Molded Grating
This research project deals with fiberglass reinforced plastic (FRP) molded grating, its properties, manufacturing materials used and appearance. Grating strength, configuration, weight...
Shear Properties of Pultruded Glass FRP Materials
The in-plane shear modulus and the in-plane shear strength of a variety of pultruded glass fiber reinforced plastic (FRP) materials were measured experimentally in a pilot test program...
Early-Time Strength and Elastic Modulus of Concrete With High Proportions of Fly Ash
Compressive strength and elastic modulus data are presented for four concrete mixtures with ratios (by volume) of Class C fly ash to total cementitious materials (portland cement plus...
Strength, Durability and Creep of Fly-Ash Concrete: Part I
In this paper, strength of concretes and mortars containing various proportions of fly ash were examined. For strength tests four types of Canadian and one type of American ash were used...
Strength, Durability and Creep of Fly-Ash Concrete: Part II
Tests on sulphate durability of various plain and fly ash mortars soaked in pH-controlled sulphate solutions were performed. The performance of several types of ash have been examined,...
70 Year Performance Record for High Strength Structural Lightweight Concrete
The paper briefly discusses the first ship built using expanded aggregates manufactured in a rotary kiln the USS Selma. It then goes on to discuss achieving high strength concrete with...
Field Performance of Fiber Reinforced Concrete Highway Pavements
This paper reports the evaluation of field performance of fiber reinforced concrete pavements. The concrete was designed for a compressive strength of about 40 MPa. Steel fibers with hooked...
Curing Time for CRCP Mixtures Based on Flexural Strength
In this paper, the effect of different curing conditions on the flexural strength is investigated, and also the minimum required period for moist curing is found. The combined effect of...
Brittleness Index of Cementitious Composites
Series of direct tension tests were conducted to observe the softening response of different types of cementitious composites, namely, mortar, plain concrete, high strength concrete, normal...
Brittleness of High Strength Concrete
Fracture mechanics approaches are needed to determine material parameters which are related to the brittleness of concrete and its structural response. The size effect method is used to...
Development of High Strength Composite Cables
Fiber reinforced composite materials offer significant advantages over conventional materials for such factors as corrosion resistance, lighter weight, and higher strengths. These advantages...
Durability of High-Strength Concrete Containing Fly-Ash and Silica Fume
The durability of high-strength concrete made with local materials were tested with regard to the freezing and thawing resistance of concrete in accordance with ASTM C666 procedure A....
High Early Strength Concrete Containing Large Quantities of Fly Ash
This paper presents results of research performed at a precast/prestressed concrete plant to identify optimum mix proportions for production of high early strength concrete with high fly...
Return to search