Prediction of Debris Flow Prone Areas and Damage
It is very important when drawing hazard maps to estimate damage to houses from debris flow of certain fixed quantities. A debris flow disaster, which occurred in Kake Town, Hiroshima...
Graphics Advances Aid Flood Engineers
In the last decade options have been suggested to the Log-Pearson III (LP3) computation for predicting design flood behavior in semi-arid conditions. Observations from an ongoing study...
The Sorry State of Flood Hydrology in the Arid Southwest
Flood hydrology for urban areas of the arid and semiarid Southwest is in a sorry state. It is based in large part on precomputer manual methods. The state-of-the-art should move into the...
Design Storms and Sizing of Flood Control Facilities
Design stroms which embody the rainfall characteristics of an area are used for the sizing of drainage facilities. The selection of a design strom may significantly influence the design...
A Value Engineering/Risk Analysis Approach to Operation and Maintenance of Hydraulic Structures
Value engineering is an objective, systematic method for minimizing cost of a system. Risk analysis is a method of quantifying uncertainties or probabilities of possible economic loss,...
Estimation of Expected Damages, Indemnification Costs and Joint Probabilities of Dam Failures
This paper describes three methods to evaluate structural options for the rehabilitation of an existing dam using the dollar-denominated risk and capital cost associated with each option...
Forces Acting on a Vortex-Excited Vibrating Cylinder in Planar Oscillatory Flow
An experimental investigation into the vortex-excited vibration of a circular cylinder in planar oscillatory flow has been made with emphasis being placed on the amplification of the forces...
Example of the Stable Channel Design Approach
This paper shows an example application of a new method being packaged by the US Army Engineer Waterways Experiment Station to aid in the design of stable flood-control channels. A stable...
Environmental Design of Channels?Can It Be Done?
The importance of environmental features to channel design is generally accepted and procedures for incorporating environmental features into flood control channel design have been developed....
Stable Channel Analytical Design Method
The Flood-Control Channels Research Program is being conducted at the US Army Engineer Waterways Experiment Station to develop systematic methods for design of stable channels for small...
Guidance on the Selection and Use of Sediment Discharge Formulas
The purpose of this paper is to discuss the sediment function module of the computer program SAM. SAM is being developed as a product of the US Army Corps of Engineers Flood Control Channels...
Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...
Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...
Conceptual Evaluation of Dam Safety by Instrumentation
The criteria governing the design of dams can frequently be imprecise. One of the most practical methods of evaluating dam safety in the dam safety surveillance programs is to check the...
Conservativeness in Hydraulic Engineering Studies
Hydraulic engineers routinely make a variety of assumptions during the course of a study. Assumptions, once made, usually become incorporated into the fabric of the study and are seldom...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
The Influence of Uniformity on Riprap Stability
Studies have shown that size uniformity influences the stability of riprap. The ratio of fractional sizes of the riprap mixture, D60/D10,...
Design and Construction of Soil-Cement Drop Structures
Soil-cement has been used as an effective and economical slope protection material for embankment dams and stream banks. This paper describes the use of soil-cement in the construction...
Characteristic Deformation of Alternate Bars Due to Low Flow
Experiments on the formation of a small meander-channel at low stage are conducted by supplying a proper discharge on initial bed of alternate bars that have been formed in experimental...
Uncertainty Estimates for Rainfall-Runoff Model
Almost all rainfall-runoff link-node models in use today involve the subdivision of the catchment into smaller areas, linked together by a system of channel links. These 'link-node'...
Return to search