Seismic Strengthening of a Tall Masonry Building
The design of a strengthening system for a tall building is proposed using ductile reinforced masonry shear walls. This innovative design concept produced a system that controlled the...
Seismic Safety Regulation of Existing Structures
Establishment of standards for seismic strengthening of existing buildings has been difficult since full compliance with current codes is generally too expensive. A general consensus has...
Historic Background of Seismic Construction in San Francisco
A seismic design and construction tradition has developed in California because of the unique experience with local earthquakes. After the 1906 earthquake and fire, building performance...
Recent Developments in Isolation Hardware
Most isolation systems have at least two physical components: one specifically intended to add flexibility and the other to control the resulting deflections. However, other elements may...
Site Characterization of Yorktown Formation for New Accelerator
The design of a new 1700-m long continuous-wave electron beam accelerator facility (CEBAF) in Newport News, Virginia demanded an extensive geotechnical exploration program be conducted...
Some Dilatometer Test Results in Pennsylvania and New York
This paper starts with a brief introduction to the dilatometer and piezoblade. Test results in four different areas are presented. DMT soundings at LR 67057 (Legislative Route numbers...
Collapsible Soils in the Antelope Valley�California
Soils subject to hydroconsolidation, commonly referred to as collapsible soils, have a potential to undergo significant volume reductions upon wetting, with or without additional loading...
Identification and Characterization of the Collapsing Alluvial Soils of the Western United States
Suggested procedures for the identification and characterization of the collapsing alluvial fan, mudflow and debris flow deposits of the arid and semi-arid parts of the western United...
A Use of Geostatistics to Predict the Occurrence of Collapsing Soils
Collapse susceptible soils are those that are stable under load while they are dry, but undergo large decreases in volume virtually instantaneously, when they become wetted to near saturation...
Foundations on Expansive Soils in Northern Virginia
Thick layers of clayey silts (MH) were observed at several sites where townhouse developments were planned. These deposits had a high shrink swell potential. Maximum swell pressure tests...
Design and Construction of Stone Column Reinforced Cofferdams
A recent expansion of the North Carolina State Port Facility, at Wilmington, involved the use of six cellular cofferdams as earth retaining structures during dredging and final filling...
Power Pole Foundations in Reclaimed Mining Area
In central Florida, where strip mining for phosphate ore is a primary industry, street surfaces often become rolling because of differential settlement, and electrical transmission poles...
Jet Grouting to Construct a Soilcrete Wall Using a Twin Stem System
An existing coal loading pier located in Norfolk, Virginia was completed in 1961 for the purpose of loading ocean going ships. It was determined that dredging adjacent to the pier would...
Consolidation Grouting Operations for Kirkwood Penstock
Kirkwood Penstock, which is part of the Hetch Hetchy water system of the City of San Francisco, California exhibited evidence of settlement and local extension following extraordinarily...
Deep Soil Mixing at the Jackson Lake Dam
The Jackson Lake Dam was constructed in 1917 in the Grand Teton National Park near Jackson, Wyoming. The dam was a hydraulic fill placed on a natural alluvium and outwash foundation. The...
Settlement Characteristics from Insitu Tests in Flyash Structural Fills
Flyash from the Baltimore Gas and Electric Company's plants was used to construct structural fills in thickness ranging from 5 to 25 feet (1.5m to 7.6m). Several warehouses...
Ground Modification for a 14-Story Structure Over a Deep Peat Deposit
The foundation design and construction for a 14-story reinforced concrete office building northwest of Minneapolis is described. The building's geometry provided unusual foundation...
Concrete Removal Techniques with Potential for Use in Rock
This paper describes concrete removal techniques that were employed in the rehabilitation of US Army Corps of Engineers mass concrete structures and are thought to have potential for limited...
Fracturing of Rock Using Expansive Soundless Chemical Demolition Agents
The theoretical principles of the action of expansive soundless chemical demolition agents are presented. The procedure for using these demolition agents are briefly outlined. Differences...
Foundation Studied for Turbine-Generator on Liquefiable Soils
Turbine-generator foundations are generally constructed of concrete in the U.S.A. This paper deals with the dimensioning and evaluation of a turbine foundation in Oxnard, California. The...
Return to search