Dredged Spoil Storage Basin in the Coastal Waters Near Rotterdam
The maintenance dredging for the Rotterdam harbour area amounts to 23 million m**3 per year, 10 million m**3 of which is polluted to such an extent that a controlled storage is required....

Land Renewal with Topsoil from Clyde Port Dredgings
The paper examines the potential of using sediment dredged from the River Clyde estuary as a topsoil in land renewal. It presents results, to date (1986), of a study sponsored by the Scottish...

Dredged Material Disposal in the Lower Great Lakes
The Buffalo District Corps of Engineers is responsible for dredging the harbors in Lakes Erie and Ontario. Approximately 2,000,000 cubic yards (1,529,000 cubic meters) of material are...

Modification of the Step Drawdown Test for Pump Selection
This paper suggests a slightly modified mathematical model for pump tests whose aim is to design the correct pump for a well. The advantage of the model presented is that it incorporates...

Water Quality and Hydrodynamics in a Shallow Lake
Hydrodynamics and water quality are closely coupled in a shallow lake via horizontal transport and sediment resuspension. The latter process is examined thru modeling and in situ field...

Submerged Vanes for Sediment Control in Rivers
A procedure is developed for a rational design of a system of submerged vanes for depth control in alluvial-river channels. The vanes are vertical, small-aspect ratio foils installed on...

A Computer Model for Oil Slick Transport in Rivers
A computer model for simulating oil slick transport in rivers is presented. In the model the effects of advection, spreading, evaporation, and dissolution on the transformation of an oil...

Evaluation of PCP/Oil Spill on CFT Indian Reservation Near Nespelem, Washington
This paper presents the immediate action taken, the field work performed, and the engineering analysis performed in response to a spillage of a solution of pentachlorophenol (PCP) and...

Flow and Sediment Transport in Curved Channels with Nonuniform Bed Material
Described is a scheme for controlling the exchange of grain sizes between bed and bed load in a curved alluvial channel. The scheme is an integral part of a model for simulating spatial...

A New Technique for Measuring Fine Sediment Accumulation in Gravel Bed Streams
The collection and analysis of bed material samples has been a standard practice for determining the quantity of fine sediments (less than 3. 4 mm diameter) in stream gravels. However,...

Laboratory Model Studies of Flood Wave Propagation
Laboratory investigations of unsteady free-surface flow with various combinations of channel and flood conditions were performed. A 72 ft (21. 9 m) long tilting flume was modified to make...

Physical Habitat Simulation and the Moveable Bed
One objective of an instream flow analysis is to quantify a flow that will maintain the existing channel and/or flush fine material from the bed. Five empirical approaches to determine...

Development of the Nauvoo Point Plant Beds
In Pool 19, Mississippi River, the accumulation of sediment has resulted in soft-substrate benthic communities or macrophyte beds. Three areas in the downstream 12 miles of the 46. 3 mile...

Analysis of Freshwater Distribution System at the Long Beach Naval Complex
This account of the evaluation of freshwater pipelines at California's Long Beach Naval Complex discusses current methods for assessing the condition of damaged water lines....

Long Reinforced Concrete Columns
Papers selected by the Reinforced Concrete Research Council of ASCE. This collection contains 13 papers reporting the results of a series of studies,...

Available Compaction Equipment
When discussing available compaction equipment we must keep in mind the purpose of compaction. Compaction is the art of artificially increasing the density or increasing the unit weight...

Construction of Roller-Compacted Concrete Pavement
Roller-compacted concrete pavement (RCCP) is the product of a relatively new concrete paving technology in which a zero-slump portland cement concrete mixture is spread with modified asphalt...

Production Analysis of the Cat 245 Hydraulic Hoe
The productivity of two Caterpillar model 245 hydraulic backhoe excavators was analyzed during their use on a highway construction project in September 1983. The hoes were working in a...

Use of Nondestructive Testing in Rehabilitation of Wood Cooling Towers
State-of-the-art nondestructive evaluation (NDE) techniques, destructive testing, structural analysis, degradation rate models and statistical analysis are combined to optimize a major...

Epoxy Repair of a Glulam Beam
The repair of timber structures by epoxy injection techniques is a recently developed repair alternative. Theoretical and experimental studies have resulted in the formulation of design...

 

 

 

 

Return to search