Influential Factors in Soil Liner Construction for Waste Disposal Facilities
Those factors most influential in the construction of a soil liner to meet a permeability performance standard of 1 multiplied by 10-7 centimeters per second (cm/sec) are identified and...
Evaluation of Compacted Inert Paper Solids as a Cover Material
The following paper presents the results of a laboratory test program which focused on compacted sludges or inert paper solids (IPS) as recommended cover (cap) material over existing IPS...
Permeability of Compacted Clay Liners in Laboratory Scale Models
Experiments conducted in flexible wall permeameters have shown that the permeability of a soil sample is dependent on the size of the specimen tested. The permeability was found to decrease...
Geotechnical Properties and Landfill Disposal of FGD Sludge
Extensive test data from more than a decade of research are compiled on the geotechnical engineering properties of flue gas desulfurization (FGD) sludges with emphasis on double alkali...
Shallow Ocean Disposal of Contaminated Dredge Material
The contaminated dredged materials from harbors and waterways along heavily populated coastal areas such as Connecticut must often be disposed at shallow ocean sites. To isolate the contaminants...
Embankment Over Fly Ash Pond at Portsmouth Power Station
The fly ash and bottom ash sediments from the Portsmouth Power Station in Portsmouth, Virginia were being sluiced into a 39 acre diked ash pond near the plant. The plant was about to convert...
Conversion of a Reservoir Into a Landfill Site
The Writer is acting as a geotechnical consultant during the conversion of a disused water reservoir into a landfill site for domestic and industrial refuse. The site developer had no...
Bentonite Matting in Composite Lining Systems
The 1984 Hazardous and Solid Waste Amendments to RCRA mandated that double lining systems utilizing synthetic membrane liners be required for hazardous waste landfills. Recognizing the...
Timber Bulkheads
Timber bulkhead design and construction methods are presented in this publication for consideration by the engineering profession. Included are papers on an analytical method for the design...
Effects of Damage and Redundancy on Structural Performance
There are numerous factors involved in the interrelationship between damage states, redundancy, system strength and structural performance. This volume examines some of these factors and...
Temporary Structures in Construction Operations
Temporary works have a primary influence on the quality, safety, speed and profitability of all construction projects. They provide access, support and protection of a facility under construction....
Foundations and Excavations in Decomposed Rock of the Piedmont Province
The five papers in this volume deal with foundations and excavations in the Piedmont Province of the USA. This is a region underlain by very old metamorphic rocks that are overlain by...
Making Embassies Safe for Democracy
American interests overseas have become among the most popular targets for terrorist attacks. Once, not long ago, security was only an afterthought for such facilities. Today, $4.4 billion...
Spanning the Seas
A proposed structural scheme, called the V�tower system, could cross vast stretches of water with record length spans yet use only conventional materials. An example is a bridge proposed...
Computer Scheduling: On-Line and On-Time
The Intermountain Power Plant, a coal fired, 761 MW coal fired electrica generating facility, has been completed months ahead of schedule and substantially under budget. Project managers...
Lawyer on a Microchip
Construction in the 1980s have become a complex, high stakes, intensely competitive business. For architects and engineers involved, the prospect of lawsuits has grown tremendously. An...
Expert Systems for Risk Analysis
An explanation is presented on why construction risk analysis can be handled by an expert system computer program. The author offers a prototype construction risk management expert system...
Building Frame Analysis in Basic
Moment distribution has, for the past 30 years, been the most popular method of analysis for statically indeterminate structures. Programmed in Basic for the microcomputer with relative...
Design of Large Steam Turbine-Generator Foundations
This report is a guide for engineers who are responsible for the design and analysis of large turbine-generator foundations. A description of the various components of turbine-generator...
Pipeline Types and Design Considerations
Pipelines are extensively used to upgrade irrigation delivery facilities. The advantages of a pipeline system include an improvement in water conservation and the ability to extend water...
Return to search