Aesthetic Issues in Timber Bridges
The vocabulary of visual design and several generally accepted major principles of visual design are reviewed in order to provide a 'context' for case studies of award-winning timber bridges....
Development of Hardwood Glulam Timber Bridge Standards
Design standards and specification for 5.5 to 27.4 m(18 to 90 ft.) clear span hardwood glued laminated (glulam) highway bridges have been developed and are available from the Pennsylvania...
Design and Field Performance of a Metal-Plate-Connected Wood Truss Bridge
This paper describes an on-going study on the design and performance attributes of an experimental wood-truss bridge. This is believed to be the first roadway bridge application of metal-plate-connected...
Bulb-T and Glulam-FRP Beams for Timber Bridges
In this paper, we discusses the manufacturing, analysis, and testing of two glulam beam designers:(1) Southern pine bulb, and (2) yellow-poplar reinforced with pultruded fiber-reinforced...
Acoustic Emission Monitoring of Steel Bridges
Global nondestructive monitoring techniques are of great significance for rapid monitoring of bridges. One promising technique involves monitoring the microseismic events (Acoustic Emissions,...
Prediction of Structural Response to Large Earthquakes by Using Recordings From Smaller Earthquakes
The feasibility of predicting structural response to large earthquakes by using recorded responses from collocated smaller earthquakes is investigated. Records from large earthquakes can...
Seismic Retrofit of R/C Columns with Inadequate Lap Splices
This paper presents experimental results on the use of rectangular steel jackets to improve the seismic performance of rectangular steel jackets to improve the seismic performance of rectangular...
Column and Beam-Column Design - A World View
This paper is concerned with the design of columns and beam-columns in steel building frames. Design provisions found in some selected codes viz. AS DR87164 87(Australia), BS5950 Part...
Some Aspects of Compression Member Design in Australia
The paper summarizes and elucidates the provisions of the Australian Standard AS4100-1990, Steel Structures, for the design of compression members. Emphasis is placed on those aspects...
Design of Half-Through or Pony Truss Bridges Using Square or Rectangular Hollow Structural Sections
The initial part of this paper will outline some of the research, testing, and investigation which has been done on half-through truss bridges. This research is primarily concerned with...
Seismic Performance and Retrofit of the Golden Gate Bridge
Since its opening in 1937, the Golden Gate Bridge has endured and functions as an important transportation link for Bay Area commerce and commuters. After an earthquake in 1989, T.Y. Lin...
Innovations in Major Suspension Bridge Design
Before the Tacoma disaster, the trend in bridge-building is on increasing slenderness. But since its occurrence, a high degree of aerodynamic stability is required. Presented are designs...
Akashi-Kaikyo Bridge Underconstruction
This paper presents 1) brief history of the survey work, 2) brief description of the physical dimensions and structural system, 3) major studies for the design, 4) development of higher...
Modal Filter Based Structural Control of a Highway Bridge
An Adaptive Modal Filter (AMF) algorithm is developed which uncouples complicated multi-mode structural dynamic response into simple single-mode response. The application to active structural...
Rehabbing Bridges Under Traffic
Four urban examples demonstrate how an owner's decision to keep it open during rehabilitation construction forces the designers to contend with an extra set of problems. Reanchoring...
Success Syndrome: The Collapse of the Dee Bridge
Scaling up existing successful designs can cause latent weaknesses to become dominant, leading to catastrophe. By studying past failures where this has happened--for example, the 1847...
Road to Recovery
The effect of the Loma Prieta earthquake on San Francisco's elevated viaduct system is still being felt more than four years later. Immediately after the quake, the entire...
Recommendations for Standards in Hydraulics
Prepared by the Task Committee on Recommendations for Standards in Hydraulics of the Hydraulics Division of ASCE. This report investigates whether...
Modular Evolution
The construction industry typically thinks of modular steel bridges in terms of the World War II vintage Bailey Bridge. The Bailey Bridge was designed to be quickly deployed to replace...
Lightweight Concrete for a Segmental Bridge
Structural lightweight concrete can help increase the stiffness and decrease the mass of a bridge; both are qualities that make the structure more likely to survive an earthquake. Ordinarily,...
Return to search