Damage Tolerance of Composites
The damage tolerance issue in composites is driven by the requirement for and implementation of a structural integrity criterion for a structural system. A key element in the design philosophy...
Coupled Bending and Twisting of Thin-Walled Composite Beams
Thin-walled open-section composite material beams of the T, I and J geometries are routinely used as stiffeners for structural components in aerospace vehicles (Starnes et al, 1985). In...
Failure Characterization of Structural FRP Bars
A combined experimental and theoretical investigation on the structural behavior of fiber reinforced plastic (FRP) bars is presented. Test results indicate that the ultimate strength decreases...
On the Design of Laminated Composite Flange: A Model with Experimental Verification
A parametric model has been developed for the optimum design of laminated composite flange. The study focuses on the evaluation and performance optimization of composite flanges with the...
The Application of Computerized Tomography for Determining Material Properties
X-ray computerized tomography (CT) is an imaging technique that has been used by the medical community for a number of years and is well documented. However, the adaption of this technique...
Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
Nonlocality of Continuum Approximation of Microcracked Materials
A continuum with nonlocal damage has recently been shown to be an effective approach for the analysis of strain-softening structures. The basic idea is that only the damage, normally caused...
A Model to Predict Restrained Shrinkage Cracking of Fiber Reinforced Concrete
Cracking due to restrained shrinkage occurs very often in an engineering practice, causing serious problems such as increased water permeability of the structure and corrosion of the reinforcement....
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Simulations of Gravity-Driven Channel Flows of Disks Floating on the Flowing Viscous Fluid
A two-dimensional discrete element model has been applied to the problem of gravity-driven channel flow of uniform disks. The particles are floating on the surface of the flowing fluid...
Interparticle Sliding and Rolling
Numerical experiments are done with a continuum plasticity program in order to study the initiation and evolution of shear bands. Many elements are used in order to resolve families of...
ASCE Annual Combined Index 1990
The
Distant Eyes
A remotely operated vehicle is a miniature unmanned submersible that contains lights, a video camera, other instrumentation, and motor thrusters to move it through the water. The operator,...
Hurricane Retrofit
Houston's Sheraton Hotel and Convention Center has been retrofitted to protect it from panel pop-out (separation from building curtain walls) and curtain-wall separation from...
Computer-Monitored Grouting
With grouting operations going on at many locations around the clock on a typical large dam-foundation project, how do you make sure that the designed mix is always being used and as-built...
Recapturing Boston's Heritage
Structural upgrading of Boston's Old State House and Faneuil Hall is part of an extensive restoration project undertaken by the National Park Service at a cost of $10.6 million...
Cables Not in Trouble
Cable-stayed bridges in the U.S. are not, contrary to reports widely disseminated in the press several years ago, about to fail from corrosion. The design, in which primary cables support...
Pipeline Rehab: Underground Options
While simply digging up old pipes and replacing them is sometimes still best, other alternatives can give long life while easing the strain on the community. Trenchless methods for on-line...
Developing High-Risk Scenarios and Countermeasure Ideas for Mitigation of Hazardous Materials Incidents
Kansas State University (KSU) conducted a comprehensive study of the development of a set of prioritized, extreme-risk scenarios, the development of a set of feasible, practical and implementable...
Return to search