ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Hydrologic and Hydraulic Calibration?A Case Study (a)
The Addison Creek watershed is in Cook and DuPage Counties just west of Chicago, Illinois. Because the watershed has a history of major flooding, eight major stormwater and flood control...

Terrain Modelling for Computer-Aided Site Development
This research proposes a terrain model and a storm drainage model to be used as tools in creating a more efficient design/approval stage of the development process. This research proposes...

Virginia Case Studies of Risk Based Drainage Design
The goal of this paper is to apply a practical engineering risk-based method of design of pavement and surface drainage systems to three Virginia case studies. The target systems include...

Comparison of Storm Water Management for Phoenix and Washington, D.C. Urban Areas
The design criteria, the methods of analyses, and the estimated costs of construction are compared for two storm water management systems in the Phoenix, Arizona and the Washington, D.C....

Towards a Better Simulation of Sea States for Modelling of Coastal Structures
In the last fifteen years, techniques of wave generation have advanced to such an extent that it is now possible to exercise controls of parameters such as wave grouping, wave asymmetries,...

Reef Breakwater Response to Wave Attack
A method of predicting stability of a class of low-crested rubble mounds referred to as reef breakwaters is presented. Findings are based on a study which included an extensive series...

Rock Armouring to Unconventional Breakwaters: The Design Implications for Rock Durability
This paper identifies the need for quantitative durability testing of rock for use on dynamically stable rock armored slopes. The derivation and use of a suite of engineering tests for...

Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....

Hydraulic Performance of Berm Breakwaters
In recent years, the concept of unconventional rubble mound breakwaters, i.e berm breakwaters, has gained much attention among researchers and engineers as an economical method to build...

Application of Computational Model on Berm Breakwater Design
The development of a computational model on dynamic stability is summarized. The model is able to predict profiles of slopes with an arbitrary shape under varying wave conditions. The...

Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...

The Development of a Design for a Breakwater at Keflavik, Iceland
A breakwater design was developed to be built using local quarried rock and relatively simple construction methods. The design significant wave height was 5.8 and the maximum depth of...

The Design and Construction of a Mass Armoured Breakwater at Hay Point, Australia
The design and construction of a prototype mass armored breakwater is briefly described. The paper also explores the practicality of allowing the progressive interaction of design, physical...

Performance of a Berm Roundhead in the St. George Breakwater System
A new harbor under construction on St. George Island in Alaska's Bering Sea is using the berm breakwater concept for protection from wave attack. Three breakwaters are included...

Implementation and Performance of Berm Breakwater Design at Racine, WI
A large berm-type breakwater has been constructed at the entrance to Racine Harbor, Wisconsin, on the western shore of Lake Michigan. The breakwater is approximately 450 feet long, in...

Berm Type Armor Protection for a Runway Extension at Unalaska, Alaska
A proposed runway extension located on the Aleutian islands was designed to withstand forces of Bering Sea storm generated waves using a unique armor protection concept. The proposed runway...

Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...

Computing in Civil Engineering
Microcomputers to Supercomputers
This book contains papers presented at the Fifth Conference on Computing in Civil Engineering. Computer applications in specific disciplines are covered. These include construction engineering...

Building Code Requirements for Masonry Structures and Specifications for Masonry Structures
The proposed Building Code Requirements and Specifications for Masonry Structures presented in this book were developed by the Joint American Concrete Institute, American Society of Civil...

Drawing up Waterproof Curtains
Curtain wall damage has recently become the number one source of building owner complaints. Until wall systems are designed with backup water collection systems and other details, leakage...

 

 

 

 

Return to search