Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Developing a Rating Table for the Central Diversion Dam Radial Gates
The Central Nebraska Public Power and Irrigation District uses radial gates for flow control throughout its system. The rating tables for five radial gates on a diversion dam are in error,...
Discharge Characteristics of Overshot Gates
Overshot gates are becoming increasingly popular for controlling water levels in open channels because of the ability of the gates to handle flow surges with limited depth changes. While...
The Effects of Water Surface Profiles on Manning's Roughness Coefficient
The Manning Equation has wide application in engineering practice. Nonetheless, certain aspects of it are still not widely understood. Often, engineers deduce the value of Manning's...
Evaluating Hydraulic Roughness in Tunnels
Much of the data presented in the literature on measured friction losses in tunnels are given in terms of the Darcy-Weisbach
Two Dimensional Modeling of the Mobile River Delta and the Mobile Bay System
Two dimensional hydraulic modeling of Mobile Bay and the Mobile River Delta was conducted to determine critical hydraulic conditions for scour evaluations at bridges in the Mobile Bay...
Estimation of High Spring Floods Causing Inundation in Non-Studied Rivers of the West Siberian Plain
Spring flooding is the main and the most abounding in water period in flow regime of West Siberian rivers. As a result, there is powerful and wide inundation on relief of West Siberia....
Zonification of Areas with Inundation Risk by Means of Mathematical Modeling in the Rosario Region, Argentina
Water course flood valleys are often being subjected to processes of urbanization that take place in several big cities of the world. Therefore, urban planning strategies based on hydric...
Contraction Scour at Bridges: Analytic Model for Coarse-Bed Channels
Contraction scour at bridges spanning coarse-bed channels is evaluated based on mass conservation of both water and transported sediment between a reference channel section near the crossing...
Numerical Simulation of Bridge Abutment Scour Development
This paper reports a project to simulate the development of a local scour hole around a bridge abutment by a computational model. From the prelim inary results obtained, it may be concluded...
The Use of an Equivalent Porosity Method to Model Flow in Marshes
Two dimensional modeling of marshes under unsteady flow conditions often involves description of sections that alternately wet and dry. The equivalent porosity method (King and Roig, 1988;...
Two- and Three-Dimensional Hydrodynamic Modeling of the Salton Sea, California
The Salton Sea, the largest surface water body in California, faces a myriad of problems related to rapidly changing water levels, rising salinity, accelerated eutrophication, fish kills,...
Data Analysis for Computer Modeling of Thermal Discharges
Assessment of the thermal discharge impact upon the environment and design of the appropriate discharge structure necessitate a range of data activities, from extensive field measurements,...
A Three Dimensional Oil Spill Model
This paper reports the development and testing of a comprehensive three-dimensional oil spill model. At present time, the model components include advection and turbulent diffusion, vertical...
The HEC NexGen Software Development Project
The NexGen project is developing successor software packages to the existing family of HEC computer programs. Development is occurring via teams comprised of technical specialists, computer...
Hydrologic Modeling System
The Hydrologic Modeling System (HEC-HMS) is new-generation software for precipitation-runoff simulation that will supersede the Hydrologic Engineering Centefs HEC-l program. Technical...
HEC-RAS (River Analysis System)
HEC-RAS (River Analysis System) is an integrated system of software, designed for interactive use in a multi-tasking environment. The system is comprised of a graphical user interface...
Next Generation Flood Damage Analysis Program
The Hydrologic Engineering Center has developed a next generation Flood Damage Analysis computer program for formulating and evaluating flood damage reduction plans. The program design...
A Comparison of Sediment Routing Models
In this paper the authors have compared the performance of coupled linear and non-linear methods of solution from these generic types, in order to assess their suitability for use in optimisation...
Hydraulic Model Study of the Prado Dam Spillway
The existing Prado Dam, located in the City of Corona, CA, is deficient in providing adequate flood protection to the Santa Ana River floodplain downstream of the dam. To provide adequate...
Return to search