The Future of Steel Structures
The future availability of steel as a construction material is covered in this paper. The advances in the material, design fabrication and erection are discussed. The quality and quantity...
Structural Wood Products
This paper provides a description of available structural wood products. Traditional products such as lumber and plywood are being supplemented by new products that include composite lumber...
Large Stone Hot Mix Asphalt: State of the Art
Improved mix characteristics can be achieved by utilizing existing well-known technologies. Developments have included: more attention to voids in mineral aggregate criteria; adjusting...
Large Stone Mixes Make a Comeback
Large stone hot mix asphalt common at the turn of the century, is making a comeback in popularity in hot mix asphalt design. Large stone hot asphalt mixtures are being used as a way to...
Reliability Assessment of Wood Components
Considerable progress has been made in the nondestructive evaluation (NDE) of wood components since the introduction of the first concepts more than twenty-five years ago. New stress wave...
Wood Variability Effects in Structural Assessment
Engineers evaluating the load carrying capacities of in-service wood structures commonly determine the strength and stiffness properties of structural wood members by various assessment...
Model for Nonlinear Behavior of Bolted Joints Under Bending/Tension Loading
A mathematical model to predict the load-deformation relationship of single-bolted connections in wood structures subjected to bending/tension loading is described. The model accounts...
Bond Strength of Epoxy-Coated Reinforcement to Concrete?An Update
The results of a large-scale study to determine the effect of epoxy coating on bond strength is described. The study addresses the effects of coating thickness, deformation pattern, bar...
Influence of Epoxy Coating on Stress Transfer from Steel to Concrete
To assess the influence of epoxy coating on the bond characteristics of reinforcing bars, a series of tests was conducted to determine differences in stress transfer between coated and...
Evaluation of Bond Performance of Epoxy-Coated Reinforcing Steel Using Nonlinear Finite Element Analysis
The role played by epoxy coatings on the failure of standard beam-end specimens is explored. The specimen consists of a reinforcing bar embedded in concrete. As the bar is loaded, the...
Bond Performance of Reinforcing Bars Embedded in Fiber Reinforced Concrete and Subjected to Monotonic and Cyclic Loads
The primary variables investigated were fiber content and loading history. The reinforcing bar size was ASTM #5. Steel fibers with hooked ends were used with four fiber contents, namely;...
Iterative Global/Local Finite Element Analysis
In spite of the advances in computer technology, there is still a need for more computationally efficient methods for performing stress analysis. One approach which is receiving increasing...
Damage Prediction in Laminated Composites with Continuum Damage Mechanics
A finite element model is developed for laminated composite plates experiencing fatigue load induced microstructural damage. Continuum damage mechanics based constitutive relationships,...
Long-Term Strength Gain or High Strength Concrete as Monitored by Drilled Cores
An evaluation was made of the relationship between standard cylinders, four-inch by eight-inch cylinders, and drilled cores. The evaluation results showed that the strengths obtained from...
Recognition and Avoidance of Details That Adversely Affect the Performance of Exposed Wood Members
Factors that affect the deterioration of wood in structures are reviewed. Important points regarding wood-moisture relationships are noted. The requirements for decay of wood by fungi...
Protection of Wood Designs in Adverse Environments
Engineers and architects are becoming increasingly aware of the risks of poor wood design practices and the benefits of using wood properly. This paper addresses biological factors that...
Long-Term Performance Reliability of Wood Materials
The United States faces a major task in maintaining and rebuilding the nation's infrastructure in the 1990's and beyond. Economic constraints have limited funds...
Methods for Assessing Wood Structures in Place
The Forest Products Laboratory is developing a comprehensive guideline for assessing the condition of existing wood structures. This paper provides an overview of the current literature...
Structural Wood Composites in Bridge Construction
Wood composites, known collectively as Structural Composite Lumber (SCL), are a family of wood-based products that better utilize the available wood fiber of a tree. This paper describes...
Building Joint Movement
Moisture leakage in masonry claddings occurs not only through copings and facial separation cracks, but also through failed sealant joints in the veneer. The factors affecting joint movement...
Return to search