Ultimate Strength and Deformation of RC Panels
In this study, twenty reinforced concrete panels have been tested under pure shear. Test results showed that the compressive strength of concrete strut was strongly affected by bond characteristics...
Analytical Model for RC Panels Under Cyclic Load
There are several existing constitutive laws for cracked concrete and steel in RC developed in Okamura laboratory. These models have been developed and verified through reversed uniaxial...
Wood Diaphragms: Performance Requirements and Analytical Modeling
Wood diaphragms represent the principal mechanisms for resisting lateral loads in many light-frame buildings. While recent research has provided several mathematical models for predicting...
Lessons Learned from Dynamic Tests of Shear Panels
Thirteen 8-ft by 8-ft shear panels and fifteen 16-in by 18-in shear panels were tested dynamically at the Structural Testing Laboratory, Richmond Field Station, University of California,...
A Structural Analysis Model for Timber Shear Walls
A numerical modelling procedure for the non-linear analysis of timber shear walls is presented. The model includes the non-linear behavior of the connectors between the sheathing and framing,...
Weathering Steel Bridges ? State of the Art
State of the art dissertations on materials that have been in commercial use for over a century are not likely to illustrate major new and innovative breakthroughs. Instead, the state...
Current Research and Future Developments
A review of current research projects at the National Science Foundation on bridge engineering are reviewed and discussed with respect to immediate and future impacts. A look into the...
Equilibrium-Serviceability Design of Hyperstatic P. C. Beams
A practical flexural design procedure for continuous prestressed concrete girders based on simulataneously ensuring specified margins of safety against both limit states of section and...
Analysis of Slender Prestressed Concrete Columns
This paper briefly describes an analytical model developed to study slenderness effects in prestressed concrete columns and walls and predict the characteristics of such members over a...
Guidelines for Application of FEM to RC Design
In this paper, the main contents of the guidelines for the application of FEM analysis to the design of reinforced concrete structures are presented. The guidelines were published by the...
Application Examples of FEM to Concrete Structures
The paper illustrates the practical application of the FEM by means of examples for plain/reinforced/prestressed concrete structures. These examples, including both global and local analyses...
The Validation Problem?Historical Developments
Validation of a probability consists of the estimation of the reliability of the probability. Validation is important when probabilities are based on data, rather than theoretical exercises....
Issues in the Validation of Probabilistic Methods
Probabilistic models are being used increasingly in safety assessments and regulatory decision-making. There is a need to relate the risks computed using these models to service data in...
LRFD for U. S. Bridge Design ? Validation Issues
During the 1987 meeting of the AASHTO Subcommittee on Bridges and Structures, recommendations from the National Cooperative Highway Research Program (NCHRP), Project 20-7/31, regarding...
Reliability-Based Design of Transmission Line Structures
Reliability-Based Design (RBD) is an emerging concept for the design of transmission line structures and holds the potential to reduce the cost of lines or increase their reliability....
Applications of Probability for Structural Analysis in the Nuclear Industry
Probabilistic techniques are being used as part of structural analysis in the nuclear industry to investigate various safety-related issues. Historically nuclear power plants have been...
Overview of Programs at Sandia National Laboratories
This paper presents on overview of the containment integrity programs at Sandia National Laboratories. Companion papers at this conference give greater details about the construction,...
Design and Construction of A 1/6 Scale, LWR Reinforced Concrete Containment
This paper summarizes the closely coordinated engineering and construction planning associated with the design and construction of a reinforced concrete containment model. Designed at...
Containment Model ? Test Program and Results
Sandia National Laboratories (Sandia) completed the testing of a 1:6-scale containment building for a Light Water Reactor (LWR) in July 1987. The containment building was made of reinforced...
An Overview of the Round-Robin Analysis of the 1:6-Scale Reinforced Concrete Containment Model
The results of nonlinear structural analyses of a 1:6-scale reinforced concrete model, which were independently conducted by ten different organizations, are briefly described and compared...
Return to search