A Demonstration of the Systems Integration Modeling System (SIMS) as a Decision-Support Tool
In April 1989, the Office of Civilian Radioactive Waste Management (OCRWM) Integration Branch completed major demonstration of the Systems Integration Modeling System (SIMS). That system...

Facility Interface Capability Assessment (FICA) Project
The U.S. Department of Energy-Office of Civilian Radioactive Waste Management (DOE-OCRWM) is sponsoring the Facility Interface Capability Assessment Project to determine current and potential...

Acceptance of Spent Fuel of Varying Characteristics
This paper is a preliminary overview of a study with the primary objective of establishing a set of acceptance selection criteria and corresponding spent fuel characteristics to be incorporated...

Investigation of Burnup Credit Allowance in the Criticality Safety Evaluation of Spent Fuel Casks
The payloads of present generation spent fuel casks are constrained by a criticality design basis that assumes loading with unirradiated fuel. This presentation discusses work in progress...

Diffusion Coefficients and Hydraulic Conductivity in Unsaturated Hanford Soils and Sediments
Two groundwater transport parameters of some Hanford formation materials, the hydraulic conductivity and the diffusion coefficient, were measured to aid in predicting contaminant migration....

Dispute Resolution ? A New Approach for Public Acceptance of the High-Level Radioactive Waste Mamagement Regulatory System
This paper examines the feasibility of utilizing Dispute Resolution to significantly reduce the numbers of technical disputes subject to litigation in civil courts or before the NRC to...

Optimizing the Spent Fuel Transportation Cask for Spent Fuel Age and Burnup: A Preliminary Analysis
The U.S. Department of Energy (DOE) has been assigned responsibility for managing the nation's spent nuclear fuel (SNF). Because of the large quantity of SNF to be moved,...

Transportation Cask Life Cycle Cost Uncertainty Analysis
This paper demonstrates an uncertainty analysis methodology using random sampling. This methodology has been applied to a nuclear waste transportation code, and several transportation...

Accident Analyses in Fulfillment of the Requirements of the National Environmental Policy Act and Their Relationship to the Packaging and Testing Requirements of the Nuclear Regulatory Commission
In planning its Transportation Program, the Office of Civilian Radioactive Waste Management must address two fundamental questions: (1) To what extent are the reasonably foreseeable significant...

Systems Integration During the Development of a Federal Waste Management System
Systems integration in the development of the Federal Waste Management System for spent nuclear fuel and high-level radioactive waste involves not only the activities traditional to development...

Important Factors in Developing a Nuclear Waste Management System
The nuclear waste management system provides unique challenges for a large and diverse segment of our society. For the politician there is the blending of national policy and the interests...

Computed Distributions of Residual Shaft Drilling and Drift Construction Water in the Exploratory Facilities at Yucca Mountain, Nevada
The Yucca Mountain Project is studying the feasibility of constructing a high-level nuclear waste repository at Yucca Mountain in southwest Nevada. One activity of site characterization...

Postclosure Safety Assessment of Radioactive Waste Disposal Systems: Current State of Understanding and International Consensus
Approximately ten years have passed since the first comprehensive safety assessments of radioactive waste disposal systems appeared. Through intensive efforts in practically all countries...

Institutional Status, Challenges, and Plans Related to the MRS Program
This paper analyzes the role of institutional considerations in the Monitored Retrievable Storage (MRS) program. Among the issues that will be discussed are: the present focus of the MRS...

Assuring Data Quality for Use in Waste Management System Trade-Off Studies
This paper details the systems engineering approach developed to ensure the integrity of a large data library throughout its development and application. The paper assesses the benefits...

A Literature-Based Preliminary Characterization of Risks in the Nuclear Waste Management System
The objectives of this study were to 1) review the literature containing information on risks in the nuclear waste management system and 2) use this information to develop preliminary...

The Systems Integration Modeling System
The Systems Integration Modeling System (SIMS) is an analysis tool for the detailed evaluation of the structure and related performance of the Federal Waste Management System (FWMS) and...

Evaluating and Controlling the Characteristics of the Nuclear Waste in the FWMS Using Waste Stream Analysis Model
The Waste Stream Analysis (WSA) Model is used by the Department of Energy to model the time and location dependent properties of the nuclear waste stream in the Federal Waste Managements...

Systems Integration Operations/Logistics Model (SOLMOD)
SOLMOD is a discrete event simulation model written in FORTRAN 77 and operates in a VAX or PC environment. The model emulates the movement and interaction of equipment and radioactive...

A Systems Engineering Cost Analysis Capability for Use in Assessing Nuclear Waste Management System Cost Performance
The System Engineering Cost Analysis (SECA) capability has been developed by the System Integration Branch of the U.S. Department of Energy's Office of Civilian Radioactive...

 

 

 

 

Return to search