An Analysis Procedure for Cable Structures Using an Isoparametric Finite Element
The computer modeling and analysis of cable structures creates a major problem for the analyst in that the geometry of the cables is dependent on analysis results. The purpose of this...
A Regional Mapping Procedure for Finite Element Mesh Design
The paper summarizes our recent work in the development of practical algorithms for the automated mesh design in finite element stress analysis. A regional mixed mesh improvement procedure...
Finite Element Analysis and Design of Plywood Shear Walls
An integrated procedure for the analysis and design of rectangular plywood shear walls is presented and illustrated. The analysis is done using an in-house finite element program with...
Finite Element Studies of Block Shear for Structural Tees
Structural tees are commonly used as tension members. As a first step toward testing the adequacy of the current design codes for net section and block shear failures near the connections...
A New Finite Element Formulation of the Generalized Laminated Plate Theory
The Generalized Laminate Plate Theory (GLPT) predicts stress distributions in laminated composite plates with accuracy comparable to a full three-dimensional analysis. The original implementation...
Prediction of Transverse Shear Stresses for Various Isoparametric Thick and Thin Shell Elements
Utilizing three-dimensional equilibrium equations (often referred to as an Equilibrium Method (EM)), an estimation of transverse stresses for fiber-reinforced laminated doubly curved shells...
Tensile Failure in Concrete by Spallation
Plate impact experiments were performed on concrete specimens to study tensile failure at high strain rates. For tensile stress pulse durations of 1.5 and 2.2 ms the threshold stress for...
On Isotropic and Anisotropic Damage Variables in Continuum Damage Mechanics
The present work analyzes the implication and limitation of some 'scalar damage' models. In particular, the elastic-damage thermodynamic potential and the 'effective...
A Theory of Porous Plasticity at Low Triaxiality
A simple multiaxial theory of plasticity which is capable of taking into account the influence of pore shape at low concentration is developed for an isotropic porous material at a triaxiality...
Cooperative Fracture?Statistical Models
The brittle failure of certain engineering materials represents but an ultimate phase in a process characterized by an evolving system of microdefects distributed over a large part of...
Chaotic Advection in a Shear Layer
The developing (in time) inviscid shear layer, although not yet in its turbulent regime, displays all the characteristics of chaotic advection. The corresponding Lyapunov exponent is strictly...
On Determination of Turbulence Model Coefficients for Anisotropic Reynolds Stress Closure Model
In this paper, the determination of turbulence model coefficients for anisotropic Reynolds stress model is discussed. The proposed model includes anisotropic Reynolds stress modeling and...
Large Deformation Analysis of Cardiac Structures
The finite element technique can be used to simulate the response of the cardiac structures that have complex shape and geometry and nonlinear material properties. This paper enumerates...
Three-Dimensional Finite Element Analysis of Stress and Activation in the Heart
A finite element (FE) method has been developed for three-dimensional (3D) analysis of stress distributions and activation patterns in the left and right ventricles of the canine heart....
Finite Element Stress Analysis of a Spinal Segment
A large number of factors need to be determined to understand the biomechanics of a surgical procedure about the lumbar spine. Some of these factors are amenable to experimental investigations...
In-Vitro Measurement of Static Contact Pressure Distribution in Synovial Joints
The objective of this presentation is, at first, to review the various approaches to the measurement of contact pressure distribution in synovial joints, and then to describe the development...
Biomechanics of Local Articular Incongruities
Abnormalities of intra-articular contact near sites of local surface incongruity are frequently associated with secondary osteoarthrosis. We here review a series of experimental and computational...
Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...
A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...
Vibration of Plates with Corner Stress Singularities
A method of analysis is presented to determine the free vibration frequencies of plates having corner stress singularities. Displacements are assumed in the form of polynomials, and corner...
Return to search