Characterization of Man-Made Vitreous Fibers by Image Analysis
This paper deals with the characterization of man-made vitreous fibers (MMVF), seen as an application of the techniques of image analysis and mathematical morphology. We present the whole...
Radiographic Visualization in Experimental Soil Mechanics
A summary of the principles of such methods is presented, i.e. stereophotogrammetry, infrared thermography and radiography and their respective ranges of applicability are discussed. Then,...
A Novel Approach to Develop a Performance Based Test for Rutting of Asphalt Concrete
Asphalt concrete consists of compacted granular aggregates mixed with viscoelastic asphalt cement. The predictive phenomenological models had limited success in explaining the origin and...
Portland Cement Concrete Apron Pavement Design Study for King Fahd International Airport in Saudi Arabia
The Federal Aviation Administration (FAA) Advisory Circular 150/5320-6C used for design of portland cement concrete (PCC) pavements for airports does not account for the site-specific...
Fracture Mechanics
This brief report, prepared by ACl 447 Subcommittee 2, reviews recent advances in finite element modeling of fracture and damage in concrete structures. The fundamentals of the fracture...
Evaluation of Dilatometer Method to Determine Axial Capacity of Driven Model Pipe Piles in Clay
The flat Dilatometer (DMT) provides a unique approach to estimate the effective stress axial capacity of driven displacement piles in clay. An investigation using this approach was performed...
Load Testing of Permanently Cased Drilled Shafts Founded in Hartford Shale
The axial and lateral load testing of three, 30 inch (76cm) diameter, permanently cased drilled shafts is analyzed herein. The prototype shafts were founded in (or on) Hartford Shale bedrock,...
Osmotic Suction as a Valid Stress State Variable in Unsaturated Soil Mechanics
The hypothesis of the research being presented is that the osmotic suction of soil pore fluid is an independent, valid stress sate variable for unsaturated soils. A review of concepts...
Modelling the Behaviour of Compacted Soils
Predictions based on a recently developed model for unsaturated soil behaviour have been compared with some results of two experimental programs on compacted soils recently published in...
Elasto-Plastic Volume Change of Unsaturated Compacted Clay
Isotropic compression tests were performed on samples of unsaturated compacted kaolin in a modified triaxial cell that allowed separate control of pore water pressure and pore air pressure....
One and Three Dimensional, Three Phase Deformation in Soil
An initially saturated soil exhibits two distinct deformation patterns as it drys. First, it deforms vertically until the soil begins to drain. Secondly , it deforms laterally as well...
The Hazard In Using Probabilistic Seismic Hazard Analysis
Probabilistic seismic hazard analysis has been used extensively for major dams; nuclear power plants; liquefied petroleum gas installations; repositories for dangerous wastes; sensitive...
Seismic Remediation for Earth Dams
Over the last 30 years or so, new analysis methods and case histories of dam performance in earthquakes have significantly changed our understanding of the severity of the earthquake hazard...
Service Records of Chicago District Breakwater Stone and How These Relate to Test Results
Breakwater stone production is limited to areas with geologic outcrops capable of producing large rocks. The most reliable breakwater stone is that which exhibits the highest degree of...
Producing Armourstone Within Aggregate Quarries
This paper discusses a series of full-scale trial blasts which was conducted in an aggregate producing quarry with the objective of improving yields of armourstone. The quantitative research...
Some Case Histories of Armor Stone Production
The blasting techniques used to produce armor stone, derrick stone, and underlayer stone [one to twenty tons] for the construction of rubblemound breakwalls and the confined Dike Disposal...
Recent Experience With Armor Stone Cracking in the Buffalo District
Accelerated deterioration of large armor stone on the Cleveland East Breakwater, Cleveland, Ohio has resulted in the need for more intensive monitoring of the entire armor stone production...
The Durability of Rubble Mound Armour in Service ? A Case Study
Over the past decade, the ongoing monitoring of Gold Coast rubble mound structures in service has demonstrated a serious loss of durability over a period of time in the rock units after...
Roller Compacted Concrete Tailing Retention Dam
A roller compacted concrete (RCC) dam has been designed for gold tailing impoundment in southeast Alaska. To minimize up front capital costs, the curved gravity dam with multiple outlet...
Behavior of Urugua-I Dam
URUGUA-I with its 76 m height is one of the higher lean roller compacted concrete dams. The project includes some outstanding features like the very low cement content and a PVC membrane...
Return to search