Research Needs in Hydraulic Engineering
The information presented herein has barely dented the surface of the needs for hydraulic research, and of the methods required to obtain funding for that research. The responses and reports...
Nonlinear Flow in Embankments
For a large number of water resources projects, the Dupuit-Forchheimer (D-F) assumption is considered a viable design criterion and, consequently, Darcy law is used to determine the locus...
Modeling Ground Water Mounding in a Heterogeneous Unconfined Aquifer
A numerical, potential flow solution for the flow pattern and water table elevation due to recharge in unconfined, heterogeneous aquifers has been developed using boundary, conforming...
Equations to Predict Critical Submergence at Horizontal Hydraulic Intakes
The formation of free surface vortices at hydraulic intakes can disrupt operation and damage machinery. It is also a serious safety concern. Theoretical investigations and laboratory tests...
Surface Flows Over Intertidal Marshes
A marsh-flow measuring device has been designed to quantify the flow across the marsh surface. The fluorometric technique by tracking the visible substance (Rhodamine red dye) applied...
Removal of Tidal Fluctuations from Pumping Test Data
A simple technique for removing tidal fluctuations from drawdown data was examined. This technique relied simply upon transforming measured surface water level data to fit the pretest...
Simulation of Subsurface Drainage of Highway Pavements
An analysis of the drainage of a pavement system from initial saturation incorporates a realistic assessment of the drainable porosity of the base. This analysis indicates that if a granular...
Annual Oscillation of Mean Monthly Water Levels at U.S. Ports
The annual variation in water level is not widely recognized among engineers. It could effect the selection of design ship channel depth or marina channel dredging, and tidal wetland creation...
Plans for a Sensitivity Analysis of Bridge-Scour Computations
Plans for an analysis of the sensitivity of Level 2 bridge-scour computations are described. Cross-section data from 15 bridge sites in Texas are modified to reflect four levels of field...
Computational Hydraulics?The Systems Approach
This paper introduces two modern computational hydraulic computer programs that combine the calculated subcritical and supercritical water surface profiles and pressure gradients in open...
Water Surface Profile Computations?How Many Sections do I Need?
One-dimensional streamflow models, including standard-step models, require a sufficient number of cross sections to satisfy two needs. First, a sufficient number of cross sections must...
Predicting Water Quality at Municipal Water Intakes?Part I: Application to the Contra Costa Canal Intake
The factors affecting water quality at a municipal surface water intake in the Sacramento-San Joaquin Delta are discussed. A model is developed that successfully predicts the seawater...
Plunge-Pool Aeration Due to Inclined Jets
The present study quantifies how jet height and nozzle inclination angle and diameter affect the rate of air entrained by inclined circular jets. An air-collection hood and a vacuum pump...
n Values for Shallow Flow in Rough Channels
Manning's friction factor n has been developed from flume data for very shallow open channel flow in a high-gradient channel with large bed material. n values are presented as a function...
Calibration of Manning's Roughness for a River Reach
The Albuquerque Projects Office of the U.S. Bureau of Reclamation collected water surface elevations for measured discharges for the Rio Grande and many of its tributaries to try to obtain...
Velocity Downstream of a Submerged Pipe Outlet
The velocity downstream of a submerged pipe outlet was examined in time and space. A model study was performed to examine the influence of boundary roughness changes on the velocity dissipation....
Use of Floodplain PCB Concentrations to Calibrate a River Hydraulics Model
A river floodplain was found to contain measurable quantities of polychlorinated biphenyls (PCBs), presumably deposited during historic flood events. A hydraulic model (HEC-2) was used...
Determination of Hydraulic Roughness for Concrete-Lined, Supercritical Channels
A channel verification program has been initiated by the US Army Engineer District, Los Angeles to determine the hydraulic roughness of flow in a concrete channel. Specifically, this study...
A Method of Managing Floating Debris
The device described offers a promising approach to a new method of managing floating debris. It modifies the surface flow of water from a submerged location. The modified flow reduces...
Predicting Critical Scour Stage at Bridges
After an initial level I screening process, most level II bridge scour studies result in recommendations for costly scour countermeasures. Typically, existing transportation budgets cannot...
Return to search