Building in Reservoirs
The Croton Supply System, one of the three major water supply systems for New York City, is undergoing extensive rehabilitation. In an innovative use of space, some of the new construction...
People Movers Move Downtown
Although the people mover has become a common sight at major airports in the U.S. and abroad, the sleek high tech vehicles have yet to establish themselves as a cost effective mode of...
Reconstruction Under Traffic: A Study of Some Effects of the Dan Ryan Project on Motor Carrier Operations in Northeast Illinois
The paper discusses preparations by the Chicago Area Transportation Study for a study of the operational responses of truckers to whatever effects upon the regional highway system are...
Fired Up at Fort Drum
The U.S. Army's first major privatization contract was signed for design, construction, operation and ownership of the Fort Drum powerplant at the newly constructed base for...
Some General Remarks on the Structural Behavior and Load-Extension Characteristics of Coated Fabrics with Special Reference to PTFE-Coated Glass-Fiber Fabric
The understanding of fabric behavior, and of coated fabrics in particular, is essential for the design and analysis of fabric structures. Although many research papers have been published...
Transmission Line Insulator Assembly Reliability
Transmission line insulator assemblies made up of ceramic or composite insulators and associated hardware are used to mechanically support and electrically isolate energized conductors...
Effect of Imperfections on Structural Performance
This paper briefly describes the effect of initial crookedness and residual stress on the behavior of steel members. Both imperfections are unavoidable consequences of modern fabrication...
Repair and Rehabilitation of Damaged Steel Flexural Members
In earlier years, the primary method for repairing steel flexural members was to replace the member. However, with the cost of labor and material increasing dramatically over the last...
The Fabrication and Erection of the Minneapolis Convention Center
A new convention center is part of the City of Minneapolis' successful plan to maintain an economically strong downtown core. It is the latest addition to a list of civic...
Local Buckling Behavior of Plate Elements
In the elastic post-local buckling range, the stress distribution across the width of compression elements of light gauge steel shapes is nonlinear. For code implementations, these stress...
Double Angle Bracing Members
It has been pointed out that when a single line of bracing is used, the member is usually made from structural tubing. It has been suggested that when the loads are not too great, consideration...
Simple Methods for Design of Steel Gusset Plates
This paper presents two simple methods for design of steel gusset plates. In the first method, the wedge theories are applied to establish state of stress in steel gusset plates. In the...
Preliminary Design Considerations for Flat Deployable Structures
Deployable structures are prefabricated frames that can be stored in a compact configuration, and can be easily deployed into a large-span, load-bearing space structure. The interest in...
Some Examples of Latticed Structures in Spain
Since the middle of the last sixties latticed structures have extensively been used in Spain to cover different large areas as factories, churches, marketplaces, exhibition palaces etc....
Analysis of Tapered and Stepped Columns by Analogy to Cantilever Deflection
An analysis is developed for handling the buckling design of tapered and stepped columns with the aid of the so called 'amplification factors'. When these factors...
Design Issues in Steel Buildings
The Committee on Design of Steel Building Structures of the Committee on Metals of the Structural Division of ASCE was formed in 1981, with the express purpose of studying problems that...
Notable Unbuilt Bridges
In the examples of unbuilt bridges discussed, many different ideas and concepts have been proposed. Most appear to be basically sound in nature, although rather innovative and daring....
Total Optimization of Truss Considering Shape, Material and Sizing Variables
A total optimum design method is developed for truss structures in which the shape of the structure, discrete material kinds and cross-sectional areas of member elements are optimized...
Plates and Shells with Crack-Like Flaws
The formulation of new hierarchial finite elements for the analysis of laminated plates and shells in the presence of flaws are discussed. The performance of the elements is evaluated...
BABE: An Expert System for Structural Design of Bridge Abutments and Piers
A knowledge-based expert system named 'BABE' (Bridge and Building Evaluation) has been developed for the purpose of helping the user in planning, analysis and...
Return to search