Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...
Variation of Permeability with Temperature in Fractured Topopah Spring Tuff Samples
Fractures will play an important role in the near-field hydrology of a nuclear-waste package in a mined repository. Our previous studies showed that the water permeability of fractured...
An Alternative Method to Mariotte Reservoir System for Maintaining Constant Hydraulic Pressure
Several problems with the Mariotte reservoir system were discovered when it was used to apply a constant water pressure as a boundary condition for a prolonged period. The constant-pressure...
A Formalism to Generate Probability Distributions for Performance-Assessment Modeling
A formalism is presented for generating probability distributions of parameters used in performance-assessment modeling. The formalism is used when data are either sparse or nonexistent....
Three-Dimensional Thermal Analysis for Temperature Distribution in Geological Formation
A three-dimensional conduction heat transfer program has been developed for use on microcomputer for thermal analysis of a conductive medium subject to, finite length heat sources. The...
System Analysis Dual-Purpose Repository New Results of Temperature Calculations
As design concept for a high-level waste (HLW) final repository the emplacement of reprocessing wastes and spent fuel elements of different types in a common repository is being studied...
Total-System Analyzer for Performance Assessment of Yucca Mountain
The Total-System Analyzer is a modular computer program for probabilistic total-system performance calculations. The code employs stratified random sampling from model parameter distribution...
A Prototype Distributed Processing System Water Control Data Processing at Tulsa District U.S. Army Corps of Engineers
The Tulsa District, Corps of Engineers operates 50 multi-purpose reservoirs controlling runoff from all or parts of 7 states. These reservoirs are operated for flood control, water supply,...
NEXRAD Input to Real-Time Reservoir Regulation
The Corps of Engineers has a need for radar information to enhance rain gauge measurements in determining average rainfall over a particular basin for hydrological forecast models used...
A Bivariate Stochastic Reservoir Model
A bivariate distribution of peak flows and volumes is derived taking into account their correlation structure. This distribution is then used to derive reservoir operation curves which...
Effect of Storm Distribution on Watershed Stormwater Management
This paper presents a case study illustrating the effect of the selection of rainfall distribution pattern upon the ability of a calibrated rainfall-runoff simulation model to replicate...
Rebuilding Buried Pipelines Without Digging
Advances and refinements in trenchless reconstruction technologies now permit system rebuilding of gravity and low pressure pipelines without excavation. Through the use of cured-in-place...
Optimizing Urban Ground Water Supply Systems
The cost of Pumping comprises a major part of total water operation and maintenance expenses. Most utilities attempt to keep these costs down. However, there are areas of study that may...
A New Finite Element Formulation of the Generalized Laminated Plate Theory
The Generalized Laminate Plate Theory (GLPT) predicts stress distributions in laminated composite plates with accuracy comparable to a full three-dimensional analysis. The original implementation...
p-Version Three Dimensional Solid Element for Heat Conduction
This paper presents a finite element formulation for a three dimensional twenty-seven node hierarchical solid element for heat condition where the element temperature approximation can...
Hydrodynamic Pressure on an Oscillating Vertical Plate
The hydrodynamic pressure on an oscillating vertical plate could be influenced by the effects of compressibility of fluids and surface waves. The compressibility is effective for higher...
Computation of Wind Flow Around a Building
A numerical investigation of wind flow around a three-dimensional building is presented by solving weakly compressible flow equations, together with Smogrinsky's subgrid-scale...
Three-Dimensional Finite Element Analysis of Stress and Activation in the Heart
A finite element (FE) method has been developed for three-dimensional (3D) analysis of stress distributions and activation patterns in the left and right ventricles of the canine heart....
Non-Linear Passive Elastic Properties of the Left Ventricular Myocardium: Application of Finite Element Analysis to 3-D Geometry Obtained from Ultrasound Images
A finite element (FE) analysis and an optimization algorithm were employed to assess the nonlinear passive elastic properties of left ventricular myocardium in a canine mode. The three-dimensional...
Finite Element Stress Analysis of a Spinal Segment
A large number of factors need to be determined to understand the biomechanics of a surgical procedure about the lumbar spine. Some of these factors are amenable to experimental investigations...
Return to search