Vacuum Melting and Mechanical Testing of Simulated Lunar Glasses
Lunar silicate glasses may possess superior mechanical properties compared to terrestrial glasses because the anhydrous lunar environment should prevent hydrolytic weakening of the strong...
Strength and Fracture of Glass in the Lunar Environment
Due to the lack of water on the moon, the effects of hydrolytic depolymerization - stress corrosion cracking - will be nonexistent in glasses produced and used on the moon. This would...
Mechanical Properties of Compacted Lunar Simulant Using New Vacuum Triaxial Equipment
Mechanical stress-strain-strength properties of Arizona Lunar Simulant (ALS) are investigated by using a newly developed vacuum triaxial device that allows compaction under different initial...
Composite Materials for Structures on Planetary Surfaces
Development of structures for planetary surface environments depends upon the use of the most appropriate materials. Advanced composite materials are apparently the best candidates for...
Comparison of Micromechanical Models for Elastic Properties
The effective elastic properties for unidirectional composites, as predicted by several analytical micromechanical models are compared for glass/epoxy and graphite/epoxy. A brief review...
Regolith Dynamics
Due to the differences of the gravitational accelerations of the Earth and Lunar environments, geotechnical engineering must be applied differently in the two environments. This study...
Combustion Synthesis of Advanced Materials
The combustion synthesis of ceramic-metal composites using an in-situ liquid infiltration technique is described. The effect of varying the reactants and their stoichiometry to provide...
Principles of Control for Robotic Excavation
Excavation can be considered one of the most unstructured problems in the construction environment. On one hand, many technologies have been developed in the past to build shelters using...
Extraction of Potable Water from Urine for Space Applications
A regenerative technology capable of managing water and wastewater on-board long-term manned space platforms is essential if the Bush Administration's Space Exploration Initiative (SEI)...
Space Station & Lunar/Mars Life Support Research
The first part of this paper will report on the tests now being conducted by the Environmental Control and Life Suport Systems (ECLSS) at Marshall Space Flight Center. The findings of...
Regenerative Life Support Technology Challenges for the Space Exploration Initiative
Regenerative life support systems have been identified as one of the critical enabling technologies for future human exploration of space. This discipline encompasses processes and subsystems...
The Lunar Transit Telescope (LTT): An Early Lunar-Based Science and Engineering Mission
The moon is an excellent spacecraft, with mass, rotational, thermal and orbital properties which make its utilization as a base for astronomical observations superbly reasonable. The Lunar...
SALSA: A Lunar Submillimeter-Wavelength Array
A conceptual design is described for a lunar submillimeter-wavelength interferometer called SALSA, a Synthesis Array for Lunar Submillimeter Astronomy. The intent is to describe SALSA...
A Systems Approach to Water Recycling Research
Because of the cost of Earth resupply, water recycling from wastewater is a critical enabling technology for long duration space missions. The need and the fact that water quality is not...
Plot-scale Field Experiment of Surface Hydrologic Processes with EOS Implications
Plot-scale hydrologic field studies were initiated at NASA Marshall Space Flight Center to a) investigate the spatial and temporal variability of surface and subsurface hydrologic processes,...
Rocket Fuel to Earth Orbits from Near-Earth Asteroids and Comets
The analysis describes an architecture to bring 10,000 tons units of rocket fuel ore, propellant and construction mass back to low Earth orbit from newly discovered near-Earth comets or...
In Situ Recovery of Water from Dormant Comet Cores & CI Carbonaceous Chondrites
Water and volatiles may be produced by drill holes into dormant comet cores or class CI or CM asteroids. This is modeled after in-situ mining as in the Frasch process sulfur mines of the...
Uniform Traffic Impact Assessment Studies?A Case History of Riverside County, California
A publication was issued by the Transportation Department of Riverside County, California, in December of 1989 which required all traffic impact studies performed for new development to...
Urban Transportation Management?Jersey City, New Jersey
This paper will describe the multi-year process undertaken to implement physical roadway improvements and transportation management policies in a constrained urban environment. Specifically...
Colgate Palmolive Transportation Impact Case Study
The Colgate Palmolive Company owns eleven city blocks of land in the Exchange Place area of downtown Jersey City, New Jersey. Colgate Palmolive operated manufacturing facilities on their...
Return to search