Optimal Design of Reinforced Concrete Structures via Decomposition and a Variety of Search Strategies
This paper presents a strategy where the design of a reinforced concrete structure is not only automated, but optimized. The strategy employs decomposition to subdivide the problem into...
Simultaneous Design and Location of Actuators
A chance constrained model for determining optimal dynamic control parameters for structures subjected to probabilistic forcing amplitudes is presented. Optimal feedback control parameters...
Optimization of RC Frames with Reliability Concepts
Analysis and design optimization are considered simultaneously for reinforced concrete frames. Global displacements were considered as design variables. The nonlinear behavior of the elements...
Structural Optimization to Limit Natural Periods
It is necessary to limit the natural periods of some structures to control their response to dynamic loads. Floor systems with natural periods greater than approximately 0.15 seconds may...
Benchmark Problems for Shape Optimization in Plane Stress or Strain
The purpose of this paper is to bring to the attention of engineers and researchers who are working with finite element shape optimization techniques, the closed-form solutions for a unique...
Stiffness Optimization Methods for Lateral Systems of Buildings: A Theoretical Basis
The sizing of the members of the lateral resistance system for multi-story buildings is often controlled by stiffness requirements. In order to achieve economical buildings, it is important...
An Analysis Procedure for Cable Structures Using an Isoparametric Finite Element
The computer modeling and analysis of cable structures creates a major problem for the analyst in that the geometry of the cables is dependent on analysis results. The purpose of this...
Column Buckling Mode Classification Using a Back Propagation Neural Network
A back propagation neural network (Rumelhart, Hinton and Williams, 1986) is used to analyze and classify the buckling mode shapes of structural columns. The input patterns consist of vectors...
Finite Element Analysis and Design of Plywood Shear Walls
An integrated procedure for the analysis and design of rectangular plywood shear walls is presented and illustrated. The analysis is done using an in-house finite element program with...
A Parallel Fron Large-Scale Stris
A methodology for large-scale structural analysis using a parallel frontal solution algorithm is developed and implemented on the Alliant FX/80 Multiple Instructions Multiple Data (MIMD)...
Parallel Preconditioned Conjugate Gradient Methods for Structural Analysis Problems with Multiple Loadings
This paper describes the use of conjugate gradient method for finite element problems with multiple loading cases. Specifically, we introduce a modified conjugate gradient method for the...
Data Modelling for Steel Frame Structures
The first step to automate any facet of structural engineering is developing a suitable data representation upon which the computer program will operate. However, there is no standard...
What Object-Oriented Programming Can Mean for Structural Engineers
In recent years, object-oriented programming has become an important topic in the computational community. Although generally viewed as a programmers' tool, object-oriented...
Extending GIS Capabilities for Enhanced Sewer System Modeling
A limitation of many sewer system modeling programs is their inability to accept and display graphic data. By the same token, many GIS packages, which handle graphics, aren't...
A Geographic Information System to Support State-Wide Hydrologic Modeling with the SCS-TR-20
A geographic information system (GIS) that is structured for hydrologic analyses has been installed in the Maryland State Highway Administration's (MSHA) Division of Bridge...
Using Off the Shelf Engineering & Business Software for Managing Water Resources, Case Study: Rancho California Water District (RCWD)
The paper presents the use of common engineering and business software packages for the purpose of managing water resources. A case example is presented where an existing water district's...
Application of Kalman Filtering to Groundwater Flow in Finite Heterogeneous Aquifers
A stochastically based methodology using Kalman filtering is presented for the optimal estimation of hydraulic properties in finite heterogeneous aquifers. This is achieved by applying...
Sediment Impediment to Boat Launching at Miller Park, City of Avon Lake, Ohio
In 1987 a boat launching facility was constructed at Miller Park, in the City of Avon Lake, Lorain County, Ohio (Figure 1). There have been problems with sediment buildup ever since it...
The Engineering of Mathematical Models
This paper presents the history of the development of a mathematical estuary hydraulic and an ecology based water quality model, and the problems encountered in transferring use to the...
Urban Storm Drainage Design Hydraulic Principles
Chapter 6 of the manual on Design and Construction of Urban Storm Water Management Systems discusses the hydraulic principles and equations under which drainage system structures must...
Return to search