A Stochastic Model for Low-Cycle Elastic-Plastic Fatigue Crack Growth
In this paper a stochastic process approach is considered to represent the random nature of the low-cycle (elastic-plastic) fatigue crack growth process. A semi-Markov renewal model is...
Pore Pressure Development: Probability Analysis
The development and subsequent dissipation of excess pore pressure, p in a soil deposit subject to an external load is examined using probability concepts that account for uncertainties...
Time Series Analysis of Wind Pressures on Low Buildings
A new methodology for the description of local wind pressures on the building envelope of mono-sloped roof buildings by using time series analysis is described. A simple AR(1) model has...
Pressures on Prisms in Turbulent Shear Flows
Experimental results are presented which show that Melbourne's 'Small Scale Spectral Density Parameter,' S, controls the negative pressures on the...
Water Distribution Network Calibration Considering Multiple Loading Conditions
Through time a water distribution network's carrying capacity is reduced as material collects on pipe walls. The impact varies with each pipe in the system and occurs at an...
Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...
Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....
New Installation Designs for Buried Concrete Pipe
The rational development of new installation designs for buried concrete pipe is described. Over 100 analyses were performed using a new computer program named SPIDA (Soil Pipe Interaction...
A Multilayered Model for Analysis of Composite Pipes
A multilayered model is developed to analyze the behavior of composite pipes, such as prestressed concrete pipe, to the combined effects of internal pressure and applied loads. The pipe...
Control of Surge Pressures in Irrigation Systems
Excessively high or low pressure within an irrigation system can result in damage to pipelines, pumps, valves, and on-farm facilities. Frequently, these pressure variations are caused...
Measurement Systems in the Hapex-Mobilhy Regional Evapotranspiration Experiment
The HAPEX-MOBILHY (Hydrologic-Atmospheric Pilot Experiment - Modelisation du Bilan Hydrique) regional evapotranspiration experiment was conducted in the south-west of France during the...
Flow Measurement Using a Digital Pressure-Time Method
This paper describes flow measurements performed by TVA's Engineering Laboratory as a part of absolute efficiency measurements of the two units at the Great Falls Hydro Plant....
Overview o New England Coastal Flood Study Methodology
This paper presents an overview of the development of methologies used to determine the probabilistic flood levels for New England coastal flood insurance studies. The Federal Insurance...
Parameter Estimation for Multiphase Porous Media Systems
Parameter estimation for multiphase flow in porous media involves estimation of nonlinear functional relationships. These include the capillary pressure - saturation relation and the relative...
Mathematical Model of Wave Induced Pressures
A two-dimensional, implicit finite difference model was built to compute surface wave induced pressures under a gravity base foundation. The results showed considerable wave attenuation...
New Methodology for Determining the Optimal Rehabilitation and Replacement of Water Distribution System Components
A methodology is presented for the determination of the optimal timing for the rehabilitation/replacement of water distribution system components in order to minimize costs. In this model...
Progressive Impact Damage Assessment in Composite Pressure Vessels
At the present time, advanced composites have been widely accepted as engineering materials. Analysis techniques for the response of composite materials and structures to static loads...
Air Power Boosts Utility Energy Supplies
Based in part on successful findings of tests, in which compressed air was stored in underground aquifers, Central Illinois Public Service engineers are investigating a type of pumped...
Model-Prototype Correlation of Hydraulic Structures
Forty-three papers are contained in these proceedings, from the International Symposium on Model-Prototype Correlation of Hydraulic Structures. The papers cover a broad range of subjects...
New Found Youth for an Old Foundry
The Grey Iron plant, central foundry division of General Motors Corp., in Saginaw, Mich. conducted a study to evaluate the capacity and tooling of future casting operations of the more...
Return to search