Fatigue Test Using Multi-Notched Specimen and its Reliability Analysis
This paper presents a fatigue testing method using a multi-notched test specimen for the purpose of estimating the distribution function of fatigue crack initiation life by a small number...
Fatigue Reliability of Prestressed Concrete Bridges
Experimental studies indicate that fatigue is a random phenomenon. Therefore, the approach is based on probabilistic methods. The fatigue life of the prestressed concrete girder is estimated...
Reliability Analysis for Nonlinear Limit States
An analytical procedure, incorporating individual probability distributions of random variables, is proposed for generating moments of any arbitrary order for the nonlinear limit state...
Lifetime-Maximum Load Effect for Highway Bridges Based on Stochastic Combination of Typical Traffic Loadings
An efficient and accurate method is proposed for probabilistic assessment of lifetime maximum load effect on highway bridges caused by traffic load. Probability distribution of the lifetime...
The N-Year Maximum Mean Values and the Coefficients of Variation of Loads Subjected to Port and Offshore Structures
It is necessary to know mean values and coefficients of variation of loads in order to verify the safety of structures. In this paper, the N-year maximum mean values and the coefficients...
Extraordinary Live Load Model in Retail Premises
Based on a live load survey on six supermarkets, the probabilistic nature of sustained live loads and simulated extraordinary live loads were examined. The simulation was performed to...
Extreme Value Distribution for Stochastic Processes Subject to a Full Load Climate
Reliability analysis of structures subject to environmental loads generally involves load effects which are properly treated as stochastic processes, and requires determination of the...
The Extremes of Combinations of Environmental Loads
The objectives and the general approach of an offshore environmental data and extremal analysis are described. The intention is to develop long-term design values of wave, wind and current...
Statistical Analysis of Australian Ground Snow Loads
This paper is concerned with the statistical analysis of snow data from the alpine areas of southeastern Australia (above 1200 m). In these areas, the local variation is large and contour...
Probabilistic Approach to Stress Distributions for Orthotropic Wood Plates
Probabilistic approach to the stress distributions of an orthotropic wood plate is discussed. The stress distributions for the orthotropic elastic media are fully dependent of the material...
Application of Probabilistic Reliability Analysis Methods to Ariane 5 Unequipped Booster Case
The paper demonstrates the capabilities of probabilistic structure analysis methods as a tool to support the design and manufacture of the Ariane 5 Unequipped Booster Case within a RAMS...
Transportation Cask Life Cycle Cost Uncertainty Analysis
This paper demonstrates an uncertainty analysis methodology using random sampling. This methodology has been applied to a nuclear waste transportation code, and several transportation...
Recent Results on the Effect of Gamma Radiation on the Durability and Microstructure of DWPF Glass
The effect of gamma radiation on the durability and microstructure of a simulated nuclear waste glass from the Savannah River Site has been carefully investigated. Three large pieces of...
Development of a CRUD Particle Size Distribution and Its Effect on Cask Source Term and Containment Analyses
Spent pressurized-water reactor (PWR) and boiling-water reactor (BWR) fuel rods from three reactors were examined by hot cell periscope, energy dispersive x-ray analysis, and scanning...
Investigation of HVAC Systems in Low Gravity Application
This paper has been developed to identify and summarize the principal areas of investigation necessary to design and install functional HVAC systems in low gravity applications. These...
The Optimum Dimensions of Radiative Spines
Radiative pin fins (spines) are important in conjunction with heat rejection systems for space applications. In the design of radiators for space applications, spines possessing minimum...
Upgrading Hydraulic Infrastructure for Level One Redundancy
In the current paper a methodology is presented for upgrading any single source water distribution system in order to provide a level one system redundancy at a minimum cost. A level one...
Predicting Watermain Breakage Rates
Recent studies on water main breakage have shown significant spatial and temporal clustering in the breakage pattern. The methodology described in the paper provides the basis for a prediction...
Optimal Operation of Multiple Reservoir Systems
In this paper a temporal decomposition approach is presented to solve a long term deterministic model for a multi-reservoir system. Through relaxation the long term problem is broken into...
Evaluation of Global Warming Impact on Soil Moisture and Water Runoff in Texas
In this paper a numerical evaluation of the variability of soil moisture and surface runoff due to global warming is carried out. An analytical model of the soil moisture balance based...
Return to search