A Modular Visual Interface for Computational Fluids Forecasting
A forecasting system is under development for predicting the three-dimensional physical features (e.g. velocity, temperature etc.) of large water bodies. Visualization and interface development...

Model Study of an Intake Structure
To increase the delivery capacity of an existing gravity-feed water supply pipeline in Orange County, California, modification of the existing structure and placement of a booster pumping...

Physical Model of a Floating Trash Boom to Control Aquatic Weeds at the TVA Widows Creek Fossil Plant
The Tennessee Valley Authority (TVA) Widows Creek Fossil Plant seasonally encounters adverse accumulations of aquatic weeds at the intakes of the condenser cooling water pumps. To reduce...

Application of a Generalized Risk Dynamic Model to a Spillway Design Flood
Risk analysis can provide a logical basis for selecting the optimal design capacity of a flow conveyance hydraulic structure for the least total cost or specified non-exceeding risk levels....

Comparison of a Vibrational Gage and a Plummet for Continuously Measuring Fluvial-Sediment Concentrations
Obtaining sediment records for small, remote streams is difficult not only because of the logistical problems, but also because of the rapid changes in concentration that accompany the...

Model Study of a Hurricane Surge Barrier Gate Valve
Physical model studies were conducted to determine the hydraulic performance of a unique vertical butterfly-gated structure. These studies were also used to determine the torque on the...

Model Studies of Outlet and Intake at McCook Reservoir
Two separate physical models were used to investigate the outflow and inflow into the proposed McCook Reservoir. The proposed reservoir will be located in McCook, Illinois, and will serve...

Loose Riprap Grade Control Structure Design
The Soil Conservation Service has been using loose riprap grade control structures based on the equal energy concept for several years with mixed success. Previous model studies resulted...

Vortex at Hydraulic Intakes with Asymmetric Approach Flows
The formation of vortices at intakes can disrupt normal operating procedures and damage hydraulic machinery. Asymmetric approach flow and a protruding pier (normal wall) contribute to...

Improved Intake Design for Downstream Migrating Fish at Hydropower Plants
Fish guidance efficiency of screens is a function of the submergence of a hydropower intake. The submergence of an intake can be reduced through the use of intake extensions or guides...

Seawater Delivery for Use in Aquaculture Development
Seawater is used extensively in industrial and aquacultural developments world wide, and aquaculture in particular requires large quantities of seawater. Development and design of facilities...

Field Measurement of Hydrodynamics and Sediment Transport of the Mississippi River at Old River
Two detailed field surveys of the hydrodynamics and suspended sediment transport of the Mississippi River at the Old River Control Structure complex were completed in February and June...

Ambient Suspended Sediment Concentration and Turbidity Levels
The temporal variation of suspended sediment concentration and turbidity is an important component of the riverine environment. The maximum rate of discrete volumetric sample collection...

Probabilistic Aspects of Hydroproject Maintenance
A survey of operation and maintenance personnel in the hydraulic structures sector was conducted to learn about the present maintenance approach and the perception of the probabilistic...

Reliability Assessment Method for Flood Forecasts
Peak discharge predictions produced by rainfall-runoff models and used by flood warning and preparedness agencies are subject to uncertainties in the input data, model parameters, and...

Measurements to Calibrate Suspended Sediment Model for Adsorbed Contaminant Transport Study of North Fork Holston River, Virginia
A daily suspended sediment (SS) and mercury transport model was developed for a 25-mile reach of the North Fork Holston River below Saltville, Virginia. Daily streamflow measurements;...

Conventional Storm Drainage Which Recharges the Groundwater
Since the demand for water is on the rise, more resourceful means of retaining and controlling the release of stormwater is needed. This retained stormwater may then be used for aesthetic...

Detention Basin Design to Control Flood Volumes
A desk-top method is presented for hydraulic design of detention basins. The main objective is to control the flood volume rather than the peak discharge. The method is based on the pre-determined...

Temporary Facilities?Making It Happen, Organization and Logistics
As construction projects become larger, more complex and are constructed both faster and under more adverse conditions--the use of temporary facilities is more prevalent. Temporary facilities...

The Benefits of U.K. Guidance for Temporary Works
In British contracts the Contractor is responsible for the design and execution of temporary works unless the Design Engineer or the Client expressly instruct how the work is to be undertaken...

 

 

 

 

Return to search