Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...
Flexural and Extensional Motion of Moderately Thick Laminated Composite Plates
A general theory of flexural and extensional motion of moderately thick laminated composite plates is developed for linear elastic materials and small deformation. Interlaminar stresses...
Damage Tolerance of Composites
The damage tolerance issue in composites is driven by the requirement for and implementation of a structural integrity criterion for a structural system. A key element in the design philosophy...
Coupled Bending and Twisting of Thin-Walled Composite Beams
Thin-walled open-section composite material beams of the T, I and J geometries are routinely used as stiffeners for structural components in aerospace vehicles (Starnes et al, 1985). In...
Failure Characterization of Structural FRP Bars
A combined experimental and theoretical investigation on the structural behavior of fiber reinforced plastic (FRP) bars is presented. Test results indicate that the ultimate strength decreases...
On the Design of Laminated Composite Flange: A Model with Experimental Verification
A parametric model has been developed for the optimum design of laminated composite flange. The study focuses on the evaluation and performance optimization of composite flanges with the...
Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...
Atomistic Simulation and Visualization of Thermal Disorder in a Crystalline Ice
The process of thermal disorder in crystalline ice has been simulated using a molecular dynamics model. The thermal disorder is induced by raising the temperature of the system. The molecular...
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
A Model to Predict Restrained Shrinkage Cracking of Fiber Reinforced Concrete
Cracking due to restrained shrinkage occurs very often in an engineering practice, causing serious problems such as increased water permeability of the structure and corrosion of the reinforcement....
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Simulations of Gravity-Driven Channel Flows of Disks Floating on the Flowing Viscous Fluid
A two-dimensional discrete element model has been applied to the problem of gravity-driven channel flow of uniform disks. The particles are floating on the surface of the flowing fluid...
Interparticle Sliding and Rolling
Numerical experiments are done with a continuum plasticity program in order to study the initiation and evolution of shear bands. Many elements are used in order to resolve families of...
Distant Eyes
A remotely operated vehicle is a miniature unmanned submersible that contains lights, a video camera, other instrumentation, and motor thrusters to move it through the water. The operator,...
Hurricane Retrofit
Houston's Sheraton Hotel and Convention Center has been retrofitted to protect it from panel pop-out (separation from building curtain walls) and curtain-wall separation from...
Recapturing Boston's Heritage
Structural upgrading of Boston's Old State House and Faneuil Hall is part of an extensive restoration project undertaken by the National Park Service at a cost of $10.6 million...
Cables Not in Trouble
Cable-stayed bridges in the U.S. are not, contrary to reports widely disseminated in the press several years ago, about to fail from corrosion. The design, in which primary cables support...
Pipeline Rehab: Underground Options
While simply digging up old pipes and replacing them is sometimes still best, other alternatives can give long life while easing the strain on the community. Trenchless methods for on-line...
Developing High-Risk Scenarios and Countermeasure Ideas for Mitigation of Hazardous Materials Incidents
Kansas State University (KSU) conducted a comprehensive study of the development of a set of prioritized, extreme-risk scenarios, the development of a set of feasible, practical and implementable...
Are We Ready to Face the Geotechnical Challenges of the 21st Century?
The geotechnical engineering profession faces a bright future as many of the issues of interest to society today relate in some form to knowledge of earth sciences. Hazardous waste, environmental...
Return to search