Transport Models to Simulate Nitrate Contamination
Computer models can be used to simulate groundwater flow and contaminant transport in the vadose zone, the results of which can be used as input to simulate flow and transport in the saturated...
Groundwater Modeling with GIS: An Example
The versatility and widespread usage of a geographic information system (GIS) as a hydrological modeling tool is only now showing up in the literature. In this regard, a research team...
Terrain Conductivity to Define Groundwater Pollution
Electromagnetic terrain conductivity surveys were conducted at four animal waste lagoon sites in South Carolina in an effort to delineate groundwater contamination from animal waste lagoon...
On the Application of Multiphase Flow Models for the Simulation of Density Stratified Flow in Aquifers
Two types of numerical simulation approach are usually applied when simulating density-stratified flow in aquifers: (a) the sharp interface approach, and (b) the coupling of flow transport...
Buoyant, Miscible Plume in Heterogeneous Aquifer
A three-dimensional, particle tracking scheme is used to compute the trajectory of and spread about the centroid of a mass slug added to steady flow through an infinite aquifer with an...
Potential Effects of Global Climate Change on the Central and Southern Florida Project
The possible impacts of some potential climate change effects such as sea level rise, changes in tropical cyclone intensity and frequency, and changes in precipitation and temperature...
Sediment Transport Measurements in the Nile River at Bani Mazar
Measurements of sediment transport on the Nile River were conducted at Bani Mazar (200 km South of Cairo) during high and low water stages. Bed-load and suspended-load transport rates...
Movable-Bed Model to Evaluate Nile River Dredging
About 200 km south of Cario, at Bani Mazar reach, the Nile River has widened and formed several islands. The result is three channels with shallow depths. One of the branches must be improved...
Application of Stable Channel Design Method
Systematic stable channel design methods are currently being developed by the US Army Engineer Waterways Experiment Station for use in the planning stages of local flood control projects....
Hydraulic Aspects of Grade Control Structures
This paper describes the function of grade control structures. The primary purpose of a grade control structure is to maintain or establish a desired bed elevation in a channel. Basically...
Bed Load Roughness in Supercritical Flow
A supercritical concrete channel is proposed for Mission Creek located in Santa Barbara County, California. The proposed channel may transport gravels and cobbles as bed load during large...
Riprap Design Criteria for the ARS Low Drop Structure
The ARS low drop grade control structure has proven to be an effective means to stabilize incised channels in Mississippi. However, field inspections and laboratory testing have indicated...
Optimizing Regional Detention Basins for Price Expressway
Stormwater runoff from the drainage area contributing to the Price-Santan Freeway is captured in regional detention basins which require a series of pump stations for evacuation. With...
New Lessons About the Hydraulic Performance of Highway Storm Sewer Inlets
Laboratory experiments were performed with highway storm water curb inlets to 1) reduce the oblique standing wave that extends into the highway from the downstream side of the inlet and...
Stepped Spillway Design for Flow Over Embankments
Many embankment dams have been identified as unable to pass their design flows without failure due to overtopping. The U.S. Bureau of Reclamation (Reclamation) is currently at the forefront...
Overtopping Flow Spillway for Baldhill Dam, Sheyenne River, North Dakota
An existing gated spillway structure for Baldhill Dam and Reservoir (Lake Ashtabula, North Dakota) is not capable of passing floods up to the probable maximum flood (PMF) without overtopping...
Fluidization Pipe Hole Spacing
Two-dimensional fluidization experiments are performed on fine (d50 = 0.15 mm) and medium coarse (d50 = 0.45...
Design of Groins on the Middle Rio Grande
The Albuquerque Projects Office of the Bureau of Reclamation wanted to use groins in place of revetments at two sites on the Rio Grande. The Bureau of Reclamation has limited experience...
Preventing Stilling Basin Abrasion
A 1:10 scale physical hydraulic model of Taylor Draw Dam outlet works was used to develop modifications to prevent back flow intake of rock into the stilling basin. Much of the back flow...
A Review of Sediment-Water Column Process Modeling and Future Applications in Waste Load Allocation
The capabilities of empirical modeling techniques are discussed and three promising mechanistic models to simulate sediment-water interactions are reviewed with respect to their possible...
Return to search