Wave Calculation Using WAM Model and NMC Wind
The CYCLE 2 version of the WAM (Wave Model) model is used to hinfcast global ocean wave spectra, using the NMC (National Meteorological Center) winds, for a period of about 60 days. The...
Computation of Wind Flow Around a Building
A numerical investigation of wind flow around a three-dimensional building is presented by solving weakly compressible flow equations, together with Smogrinsky's subgrid-scale...
Effect of Stenotic Geometry on Blood Flow Behavior
The dynamic characteristics of the blood flow is affected by the area reduction of stenosis. To estimate the severity of stenosis, the information about the geometry should also be accounted....
A Computer Simulation of the Blood Flow at the Aortic Bifurcation with Flexible Walls
To understand the possible role of hemodynamics in the atherogenesis, especially the effect of the flexibility of the arteries, a two-dimensional numerical model for the blood flow at...
Effects of Artificial Heart Pumping on Hemorheology
Alterations in hemorheology were studied in 19 patients supported by the Jarvik-7 total artificial heart (TAH) anywhere from 1 to 48 days as a bridge-to-cardiac transplantation. Abnormally...
Structural Aspects of Femoral Head Osteonecrosis
Orthopaedic management of early stage osteonecrosis (ON) of the femoral head is aimed at delaying or preventing collapse of structurally weakened regions of repairing dead bone. The advent...
Biomechanical Model of a Lumbar Intervertebral Joint?A System Approach
This study was conducted to determine the forces sustained by the lumbar ligaments under flexion-compression using a two-dimensional equilibrium model. The lumbar motion segment was modeled...
Computational Mechanics: Constitutive Modeling and Performance Analysis
The availability of supercomputers in the 80's has brought about a revolution in the analysis and design of complex structures. Parallel with this, computers have played a...
Foias-Temam Approximations of Attractors for Galloping Oscillators
A method for the algebraic approximation of attractors recently developed by Foias and Temam is adapted for application to autonomous galloping oscillators. We compare results obtained...
Experimental and Numerical Chaos in Continuous Systems: Two Case Studies
Motivated by recent numerical investigations according to which certain types of deep-water compliant offshore structures may experience undesirable chaotic motions, two types of experimental...
Chaotic Analysis of Dynamic Bifurcation of Viscoelastic Shallow Arches
Periodic and chaotic motions in a mathematical model of an imperfect, viscoelastic shallow arch under a dynamic sinusoidal load for both the symmetric and the coupled unsymmetric responses...
Cumulants of the Nonlinear Combination of Independent Random Variables
A random variable of interest is often the sum of linear or nonlinear combinations of many independent random variables. In calculating the statistics of this random sum, advantages of...
A Comparison of Modeling Techniques for the Buckling of Stiffened Shells
Different techniques are used to compute the collapse loads of a family of stiffened shells. Large differences are observed between the various predictions. Detailed numerical studies...
Use of Laser Holography and Image Analysis for Crack Measurement and Determination of Strain Fields in Cement Based Materials
The authors have successfully used laser holographic interferometry to measure various parameters, such as crack size, crack spacing, crack opening displacement, surface displacements...
Visualization of the Microstructural Response of Lightly-Cemented Granular Soils Under Uniaxial Strain Conditions
The microstructural response of granular soil under uniaxial strain is being investigated through direct observation of micromotions. Two techniques are being refined to quantify individual...
The Application of Computerized Tomography for Determining Material Properties
X-ray computerized tomography (CT) is an imaging technique that has been used by the medical community for a number of years and is well documented. However, the adaption of this technique...
Experimental Techniques to Study the Microstructure of Cement-Based Materials
Techniques to identify phases and changes in microstructure within cement paste, mortar, and concrete using a scanning electron microscope and image analysis system are described. Backscattered...
Cement and Concrete Characterization by Scanning Electron Microscopy
The scanning electron microscope (SEM) is a powerful tool for the microstructural and chemical characterization of cement and concrete. Imaging techniques such as secondary electron, backscattered...
Nonlocality of Continuum Approximation of Microcracked Materials
A continuum with nonlocal damage has recently been shown to be an effective approach for the analysis of strain-softening structures. The basic idea is that only the damage, normally caused...
Microscopic Modeling of Shear Strength of Contaminated Soils
The degradation of shear strength of soils due to prolonged contamination of soils is an emerging problem. The experiments conducted at New Jersey institute of Technology showed a gradual...
Return to search