Cement Manufacture and Use
This book,
Fracture Mechanics Applied to Geotechnical Engineering
This proceedings,
Ground Failures Under Seismic Conditions
This proceedings,
Design of Shotcrete Support from the Rock Mechanical Viewpoint
When designing tunnel support the key question is to determine the loading conditions resulting from the deformation of the rock mass during and after excavation. Principle views are given...
Design and Application of Integrated Shotcrete Linings for Underground Openings in Weak Rock Masses
Tunnels and caverns excavated in weak rock masses require special consideration in terms of shotcrete lining design. Shotcrete as a support medium for weak rock provides major benefits...
Reduction of Head Losses in Tunnels by Means of Shotcrete
Head losses in blasted rock tunnels conveying water to hydropower stations often significantly reduces the energy production in the plant. Typical values on the head losses in tunnels...
Active Tunnel Design?A New Concept for Predesign, Contractual Lay-out and Construction Management
Active tunnel Design is a new concept for design, layout of specification and contract, and for construction management of tunnels and underground carverns. Investigations yeild more information...
The Influence of Water Glass on the Technological Parameters of Shotcrete
Shotcrete used in tunneling must follow a clearly defined early strength development in order to comply with stresses from rock deformations and drilling and blasting. Accelerators are...
New Advances in Shotcrete Additives: The DELVO System
The DELVO system is a two component, nonchloride chemical system developed to control the dynamics of cement hydration. Concrete, treated with the DELVO system, can be kept in a plastic...
Advances in Dry Shotcrete Technology by Means of Microsilica
During the last decade microsilica has been increasingly used to improve both wet and dry mix shotcrete. In the traditional dry process microsilica is blended in the dry mixture. Since...
An Identity Chart for Steel Fibers
Improvements in ductility and toughness by adding steel fibers to the shotcrete mix are sufficient to enable steel fibers to be used as replacement for steel mesh reinforcements. Steel...
Fire Testing of Shotcrete Samples in a Small Furnace
The fire resistance behaviour of 8 shotcrete samples were investigated in a laboratory furnace applying ISO 834 standard test. Shotcrete was applied on 20 to 30 cm thick granite slabs...
Use of Steel-Fiber Reinforced Wet-Mix Shotcrete in Extreme Rock-Bursting Conditions
If the stresses close to tunnels or caverns exceed the capacity of the surrounding rock, rock-bursting might start. When tunneling in such rock conditions the need for a safe, quick and...
Steel Fiber Reinforced Shotcrete?For Rock Support and Fire Protection
Rapid development in concrete technology and development of equipment has led to a change from dry hand-operated to wet robot shotcreting in Norway. Shotcrete of more than 100 MPa cube...
Use of Long, Variable Length Steel Fibres in Shotcrete
Steel wires are cut to fibres in a shotcrete nozzle and directly incorporated in the ejected shotcrete. Long and variable length fibres can be used. The fibre material is better utilized...
Steel Fibre Reinforced Wet Shotcrete with Very High Deformation Capacity
Tests have been carried out under site conditions in Norway where the performance of 40 mm long DRAMIX fibres was compared with normally used 30 mm fibres. The fibres were mixed into the...
Fibre Reinforced Shotcrete Case Studies of Wet and Dry Processes
Both wet shotcrete and fibre reinforced shotcrete are being increasingly utilised in the South African mining industry. This Paper describes two applications of fibre reinforced shotcrete...
Reinforced Shotcrete Linings as Part of an Integrated Support System Used in a High Stress Mining Environment
Shabanie and King Mines are situated in the Southern part of Zimbabwe, some 60 km apart and approximately 200 km east of Bulawayo. They are the largest underground operations in Zimbabwe...
Tutorial on Computer-Aided Design
These tutorial sessions are designed to provide a basic introduction to the use of Computer-Aided Design/Drafting (CAD) in transportation engineering, with particular regard to Civil Engineering...
Factors Controlling Strong Ground Motion and Their Associated Uncertainties
Of special interest in strong ground motion modeling is a quantification of the degree of influence specific physical parameters have on the computed motions. Associated with the model...
Return to search