Incorporating Corrosion in Reliability-Based Design of Anchored Bulkheads
Corrosion of steel is an important factor in the design of marine structures. A reliability analysis of anchored bulkheads showed that corrosion changes the critical failure mode from...
Reliability Model for Bridge Columns under Seismic Loads
This paper develops a model for the analysis of the reliability of bridge columns under earthquake loads. Probability of failure is defined as the probability that the displacement ductility...
Pre-Envelope Covariance Differential Equations
The problem of predicting the safety of structural systems subjected to random loading arises in may engineering applications. In this framework the envelope process plays an important...
Surface Motion Due to Stochastic Plane Sources in a Layered Medium
To simulate the ground motion in the near field, a seismic fault is modeled as a two-strip plane. The width of each strip is so thin that the rupture process of the strip can be described...
In-Plane Non-Linear Random Vibration of Composite Plates
Filamentary composite structural components used in engineering applications are usually subjected to stochastic loads. Composites have strongly anisotropic properties and display significantly...
Linear System Spectral Moments Determination
The stationary response of a linear system to random excitation is considered. A previously developed approach is extended to be applicable for the determination of both even and odd order...
Probabilistic Characteristics of a Sliding Structure Via New Stochastic Linearization Methods
New, non-classical stochastic linearization techniques are applied to solve the titled problem. Two alternative criteria, suggested by X. Zhang and I. Elishakoff, respectively, are evaluated....
Reliability Consideration in Shakedown Analysis
Shakedown analysis for ductile rigid frames has shown that a structure can respond linearly at a higher elastic limit after it has experienced some plastic deformation. If the residual...
Parameter Estimations of Structural Dynamic Systems
In this paper, time-domain methods for estimating the system parameters and the modal properties of linear structural dynamic systems are studied. The autoregressive and moving average...
Offshore Pile System Reliability
The existing design methodology for offshore pile foundations is evaluated relative to the ultimate performance of the foundation system using reliability techniques and data from three...
A Criticism of Statistical Methods in Probabilistic Models in Structural Reliability
The usual statistical models, classical and Bayesian, are not well suited for problems of structural reliability, since here we have rarely as assumed for these models a sequence of identical...
Sensitivity Evaluation of Simulation Methods for Reliability Assessment
Commonly used reliability assessment methods include the first-order methods, second-order methods, and Monte Carlo simulation methods with or without variance reduction techniques. The...
High Order Statistics in Structural Reliability
The new simulation technique described in this paper attempts to avoid the significant amount of arbitrariness involved in the choice of the sampling distribution in the increasingly popular...
Experiences with Experimental Design Schemes for Failure Surface Estimation and Reliability
When using FORM and SORM to predict the probability of failure for a structural component a model for the failure function has to exist. For certain structural components a mechanical...
Slepian Process of a Non-stationary Process
An algorithm for simulating a zero-mean non-stationary Gaussian process over a fixed interval [0,T] with given arbitrary covariance function as well as the associated Slepian model process,...
Stochastic Finite Element Analysis of a Damped Beam on Random Foundation and Subjected to Fast Moving Loads
The dynamic effect of fast moving loads on a rail is analysed by the perturbation-based stochastic finite element method. The rail is modeled as an elastic beam resting on the Winkler...
Finite Element Dynamic Reliability Analysis with Condensation
This paper presents the use of matrix condensation in stochastic finite element-based reliability analysis of structures subjected to dynamic loading, in the context of modal superposition....
Reliability of Nonlinear Frame Structures by SFEM
A method is proposed for the reliability analysis of nonlinear frame structures with flexible connections. The uncertainty of a connection is represented by a group of random moment-relative...
Calibration of Redundancy Factors for Highway Bridges
The object of this study is to develop a framework for considering redundancy in design and load capacity evaluation of highway bridge superstructures. The proposed method consists of...
Structural Reliability and Proof Testing for Highway Bridges
This paper proposes a set of reliability-based proof load factors for highway bridge evaluation, to determine target proof load and load rating. The target safety index used is consistent...
Return to search