Testing of Admixtures for Seabed Strengthening
Samples from several offshore soil borings in an area of the Beaufort Sea were subjected to laboratory testing to determine the applicability of this method. The soils were mixed with...

Ice Cover Research?Present State and Future Needs
Presentation reviews, at first, a number of problem areas in ice engineering, such as the determination of vertical and horizontal forces floating ice covers exert on fixed structures,...

Repair Welding of Arctic Offshore Structures and Vessels
This paper describes the welding procedure development for repair or field modifications of offshore drilling structures and vessels made with several different steel grades produced for...

Finite Element Modelling of Cold Regions Concreting
Finite element heat transfer computer programs are discussed in regard to their use in modelling cold weather concreting. The concrete material properties required for input to the finite...

F.E.M. Analysis of Mobile Arctic Caisson Island With Stochastic Material Properties
The paper examines how soil uncertainty influences the short term settlements and stresses of the Mobile Arctic Caisson on the original sea bed. Utilizing a two-dimensional plane strain...

Geomembrane Liner Performance in the Arctic
A geomembrane liner must be selected not only on the basis of its chemical compatibility with the substance to be contained, but also on the basis of its physical performance characteristics...

The Transport of Crude Oil Under Saline Ice
A mathematical model was developed to describe the forces acting on an oil slick under saline ice in the presence of a water current. The model was verified through a set of laboratory...

Moisture Effects on Extruded Polystyrene Insulation
The amount of moisture within the insulation was determined by carefully weighing each sample and then measuring its volume. Two methods of measuring thermal conductivity were used. The...

The Evolution of a Factory Insulated Piping System
This paper reviews the developments over the past fifteen years in a factory insulated high density polyethylene piping system that has become a standard for sewage and water piping systems...

Insulation Performance Beneath Roads and Airfields in Alaska
Evaluations of the long-term thermal performance of installations in Alaska for frost heave control have included sampling and testing of the insulations to determine the retained thickness,...

Sheet Pile Interlock Behavior: A Moving Contract Problem
The finite element method is used to analyze the behavior of sheet pile interlocks subjected to an uniaxial pull test. The thumb and finger of the interlock provide three contact points...

Optimal Design of Continuous Prestressed Concrete Girders
Design of continuous prestressed concrete girders with possibility of parabolically varying depth in each span is formulated in the form of a mathematical programming problem. The design...

Finite Element Discretization for Mixed-Mode Fracture Problems
The finite element discretization of mixed-mode problems in fracture mechanics is investigated. The characteristics of the mesh near the crack affect the accuracy of the finite element...

Strengthening Alaskan Beaufort Sea Soils with Portland Cement
Preliminary studies undertaken to assess the feasibility of utilizing gravity structures on soft arctic silts indicate that the available foundation capacity are insufficient. Therefore...

Failure Investigations for Forensic Engineering
Failure investigations related to construction Industry is described in detail in the article. A failure investigation is one of the most demanding of engineering undertakings. It requires...

Large Mat Foundation Analysis on Expansive Soil
This paper describes a comparison of predicted and observed performance of mat foundations on stiff expansive soil. Foundation performance was predicted using a new computer program BOSEF...

Attaching Steel Members to Reinforced Concrete Elements
A variety of structural systems have been devised to strengthen existing buildings for improved seismic resistance. Strengthening methods currently in use for reinforced concrete structures...

The Asbestos Impasse
Removing asbestos from the nation's buildings is a major task . Consulting engineers can play an important part in the process, locating and quantifying the carcinogenic material,...

Attapulgite: A Clay Liner Solution?
Poor performance of clay liners at waste management facilities has resulted in the EPA mandate of synthetic polymeric liner materials to comply with zero penetration requirements. Laboratory...

U.S.-Japan Coordinated Program on Masonry Research
An overview of the U. S. -Japan Coordinated Program on Masonry Research is presented. The program consists of parallel efforts in Japan and the United States to develop design methods...

 

 

 

 

Return to search