Design Considerations for Multi-Wheel Aircraft
The available test data for performance of flexible pavements were analyzed using the Boussinesq and elastic layered theories. It was shown that strain criteria could be developed for...
Denver International Airport Fabric Roof Design
The design of Denver's Landside Terminal Complex for the new Denver International Airport, called for some far reaching vision coupled with imaginative building technologies. Because of...
The Design of the Airside Concourses
The growth of commercial air traffic in the United States has resulted in the development of the 'New Denver International Airport.' the airside concourses were designed by joint venture...
The Airport Traffic Control Tower for the New Denver International Airport
Developing a new airport traffic control tower involves many complexities of planning, engineering, and coordination. For the ATCT at the New Denver International Airport, these complexities...
Modeling Nearshore Currents in the Vicinity of the Endicott Causeway, Alaska
The Endicott Causeway connects two oil production islands on the southern side of Stefansson Sound, about 5 km offshore of the Sagavanirktok River delta, to the mainland of the Alaskan...
Impact of Breakwater Removal on Hydrodynamics and Water Quality in Flushing Bay, New York
Hydrodynamic and water quality models were used to simulate the potential effect of removing a breakwater to increase flushing and improve water quality in Flushing Bay, New York City....
Nondestructive Testing of Concrete Elements and Structures
Quality of a concrete structure depends on good construction practice. On the other hand, continuous repair and maintenance preserve the quality of construction. Nondestructive evaluation...
Evaluating Spillway Adequacy
More than a third of all dam failures are caused by overtopping. Equipment malfunctions or operations errors are sometimes to blame, but the principal cause is inadequate spillway capacity....
The Future Role of Factory Built Housing
For most of this century, and particularly around 1970 as epitomized by Operation Breakthrough, the concept of transitioning the US housing industry from stick-by-stick field building...
Customer Requirements in Industrialized Housing
Residential construction efforts in the U.S. are highly fragmented, and this has slowed the application of new technologies. While there has been an increase in the use of manufactured...
Computer Modeling of Structural Systems for Residential Scale Buildings
The majority of housing in the United States is single family residences or low-rise multiple family dwelling units. The structural systems usually consist of rather uncomplicated types...
Piping in Earth Dams of Dispersive Clay (Paper introduced by Norman L. Ryker)
In 1971 Jim Sherard was engaged to investigate the common failure of a group of Soil Conservation Service (SCS) floodwater retarding earthfill dams built between 1957 and 1970, eleven...
Aversion to Epistemic Uncertainties in Rational Decision Making: Effects on Engineering Risk Management
When faced with epistemic uncertainties in a decision problem, subjective expected-utility theory (SEU) implies that the only relevant characteristic of these uncertainties is the mean...
On Deciding Between the Use of Engineering Standards and Risk Analysis
Risk analysis offers advantages for the optimal design and maintenance of infrastructure, but it is not always practical to apply due to the nature of certain types of infrastructure....
System Engineering and Risk
System engineering means many things to many people, but there is a large group of practicing engineers in the defense and energy sectors who define system engineering as a structured...
Optimal Allocation of Resources in Repair and Maintenance of Bridge Structures
The structural design process, examined in its entirety (and taking into account the uncertainty and randomness that characterize the governing parameters) is a decisional process, involving...
Linearisation and Offshore Fatigue Reliability
In determining the force effects due to wave action on offshore structures it is conventional to use an equivalent linearisation to convert wave velocities to forces via Morison's equation....
Reliability Analysis of Lunar Structures Under Meteoroid Impact
The United States is slowly moving towards lunar base, and possibly Mars base, activities. Design of structures for these bases requires knowledge about loadings and conditions which in...
Probabilistic Analysis of Post-Tensioned Steel Girder Bridges
External post-tensioning is used as a means of strengthening existing steel girder bridges. Since absolute safety of structures is impossible to attain due to uncertainty in load and resistance,...
Fuzzy Measures in the Knowledge Based Diagnosis of Seismic Vulnerability of Masonry Buildings
Rules based expert systems and fuzzy logic have been employed to increase the speed and the reliability of the survey of masonry buildings, to forecast their seismic vulnerability....
Return to search