Structural Materials
This volume of Structural Materials contains papers from 12 sessions of the 7th Structures Congress held in San Francisco on May 1-5, 1989. The sessions cover a very broad range of topics...
Design of Plastic Piece Parts
This paper describes a computer assisted design process originally developed at the University of Wyoming and now implemented in commercial software. In order to address the need for broadly...
Constraint Based Design from Research into the Classroom
Design is constraint oriented; much of the design process involves the recognition, formulation and satisfaction of constraints. Constraints are continually being added, deleted and modified...
Stereolithography
Stereolithography is a three-dimensional printing process which produces accurate copies of CAD solid or surface models directly from CAD data. The process uses a moving laser beam, directed...
Gamma Exposure from Rn Progeny in GAC Units
An investigation into the gamma exposure rate generated by granular activated carbon (GAC) water treatment units focused on ten sites that covered a range of source radon (Rn) in water...
Ozonation of a Biorefractory Organic Compound
This study involved determination of the degradation of chlorendic acid due to ozonation, possible biodegradation of the resultant products, and possible toxicity of the resultant products....
Using Borosilicate Glass as a HLW Storage Medium
There is growing concern over the quality of present high level waste management techniques. Instances of nuclear accidents and contamination at nuclear waste sites in the United States...
Preacquisition Environmental Site Assessments: Avoiding Common Errors and Omissions
The 1986 Superfund Amendments and Reauthorization Act (SARA) established an 'innocent-purchaser' defense to environmental liability from ownership of contaminated...
Trio of Microcomputer Models for Organic Chemical Transport in Rivers
Three microcomputer models have been jointly developed to provide tools to simulate the fate of organic chemicals in river systems. The three models offer a range of complexities and data...
Low-Level Waste Disposal Design: An Overview
Low-Level radioactive waste disposal is regulated by several agencies. Mixed waste, which is both radioactive and chemically hazardous is regulated by two agencies with potentially different...
The Utilization of a Deflocculant to Decrease the Permeability of a Clay Liner
A hazardous waste landfill was completed in Oklahoma during 1988. The clay liner was constructed to fulfill the RCRA requirements for permeability of equal to or less than 1E-07 centimeters...
Water Quality Criteria for Irrigation
An assessment of irrigation water quality for the concentration of inorganic constituents should consider crop sensitivities, soil properties, such as hydraulic conductivity, reactions...
Drainage of Landfill Covers and Bottom Liners
This paper presents two new tools for preliminary evaluation of drainage-system designs. The first is a set of equations that define the saturated-depth profile for steady drainage over...
State Financing of Soil Conservation Programs
Federal financial incentives to implement conservation programs under traditional programs probably will not increase. Any increases in present financial incentives and new incentive alternatives...
Instability of Bed-Surface Composition Due to Sorting Process in a Stream Composed of Sand and Gravel
Wavy patterns of sorting are often observed in a stream composed of sand and gravel, and they are regarded as instability of bed-surface composition due to selective bed-load transport...
Sediment Transport Modelling from Grain Size Data
Grain-size analysis can be useful in determining some of the hydrodynamic aspects of the evolution of a natural sand body. The suite statistics approach minimizes single-sample anomalies...
Sediment Transport in Hyperconcentrated Flows in Sand-Bed Streams
This study advances the understanding of sediment transport of bed material discharge in sand bed streams through application of recently developed theoretical concepts related to the...
The Relationship of Milligrams Per Liter to Parts Per Million
Derivations of the relationships between mg/l and ppm are presented. Although forms of these relationships can be found in scattered references, the author's intent is to...
The Area of Scour Hole Around Bridge Piers
The study is focused on what parameters determine the area of scour hole around bridge piers. An analytical study based on momentum principle has been used to reveal the variables involved...
Hyperconcentrations, Mud and Debris Flows?A Summary
Brief descriptions of the properties of mud and debris flow and hyperconcentrated stream flow materials and their importance to the descriptions and modeling of these flows are presented....
Return to search