An Integrated Knowledge System of Seismic Vulnerability and Risk for Engineered Facilities
This paper describes an integrated knowledge system for the assessment of the seismic vulnerability and risk of engineered facilities. The system integrates knowledge from many fields...
A Knowledge Based System for Deriving Qualitative Seismic Behavior
The analysis and design of complex or critical facilities, such as tall buildings, nuclear power plants, offshore structures, or cable stayed bridges requires that these facilities be...
A Knowledge-Based System for Evaluating the Seismic Resistance of Existing Buildings
The large number of existing buildings designed without considerations of seismic loading warrants the development of computer aids for the evaluation of their seismic resistance. Since...
Polymer Concretes
Polymer Concrete (PC) is prepared by using polymeric materials to bond inert aggregates in a fashion similar to that of Portland Cement in the preparation of Portland Cement Concrete (PCC)....
Testing of Reinforced Concrete Bridges for External Reinforcement
Several continuous reinforced concrete slab bridges were constructed in the 1950's with spans ranging from 30 ft. to 60 ft. Longitudinal cracks were observed in the tension...
Sulfate Attack on Concrete Containing Fly Ash
The use of fly ash as a portland cement replacement in concrete may provide many technical and economic advantages. One such technical advantage is to improve the resistance of concrete...
Fatigue and Fracture Evaluation of Riveted Bridge Members
Among the major concerns of bridge engineers today are the fatigue damages that have been accumulated in riveted members and the safety of riveted structures. Many of these structures...
Fatigue Strength of Corroded Rolled Beams
Highway and railway bridges fabricated from ASTM A7, A36, and A572 steels will corrode if the paint system is allowed to fail for lack of maintenance. Corroding members lose cross section...
A Method of Computing Impact and Fatigue Life in the Railway Steel Girder Bridge
The purpose of this paper is to investigate the dynamic interactions between an steel girder bridge and a moving freight train. A non-linear, 100-ton, freight car vehicle model and a 70-ft...
Fatigue Evaluation of a Riveted Railroad Bridge
An 83 year old railroad bridge was analyzed for fatigue based on historical records such as the original schedules. Based on the number of cycles to date, corresponding to an effective...
Fatigue Behavior of Steel Connection Angles
A method for predicting the fatigue behavior of flange angle elements is presented. The primary emphasis herein concerns an analytical approach for evaluating the fatigue life of flange...
Fiber Composite Materials in an Arctic Environment
This paper summarizes a study on the behavior of light-weight structural composite materials in cold environments. Results are presented for two composite materials: fiberglass-epoxy and...
Water Transport in Limestone by X-Ray CAT Scanning
The transport of water through the interior of Salem limestone test briquettes can be dynamically monitored by computer aided tomography (commonly called CAT scanning in medical diagnostics)....
Enhancing Concrete Durability by Treatment with Sealers
This paper summarizes some of the research which has been undertaken on sealers for hardened concrete during the last ten years at Wiss, Janney, Elstner Associates. Inc. The research used...
The Use of Penetrating Sealers on Concrete Bridge Decks
Acceptance criteria for Penetrating sealers is shown. Penetrating sealers can be used as cost effective preventive maintenance for bridge deck concrete in northern climates. Factors affecting...
High Molecular Weight Methacrylate for Sealing Cracked Concrete
The sealing of cracks in concrete surfaces has been one of the most difficult types of repair to accomplish. Epoxy injection has been widely used, but due to its relatively high cost,...
Use of Copper Slag for Construction Purposes
Standard laboratory test results on the fine- and coarse-grained fractions of a copper slag have been presented. Based on the results of these tests, the possible use of the fine fraction...
Predicted Fatigue Life Behavior of Stay Cables
Monte Carlo simulation results are used to illustrate the relationship between the fatigue lives of short prestressing strand test specimens and long strand stay cables. Long stay cables...
A Summary and Review of Fatigue Data for Mechanical and Welded Splices in Reinforcing Bars
Published reports pertaining to fatigue tests of welded and mechanical splices in reinforcing bars were reviewed. It was observed that most specimens fractured in the reinforcing bar adjacent...
Fatigue Strength of Welded Steel Mesh
Welded steel mesh (WSM) is prefabricated by welding cold-drawn wires in a grid-like mesh. Engineers avoid using WSM as main reinforcement in highway structures due to their lack of knowledge...
Return to search