After-Fracture Response of a Two-Girder Steel Bridge
The I-40 bridges over the Rio Grande are due to be razed in mid 1993 due to geometry and traffic safety considerations. The bridges are classified as 'fracture critical' two girder steel...
Full-Scale Bridge Test to Monitor Vibrational Signatures
A full-scale highway bridge, in the process of being demolished and replaced was monitored using vibrational techniques in its in-service condition. The bottom flange and web of one fascia...
Signal Analysis for Quantitative AE Testing
Quantitative acoustic emission (AE) techniques can be used to monitor crack growth and to deduce microfracture mechanisms in quasi-brittle materials. Multichannel data acquisition systems...
Monitoring Performance of Full Scale Structures
General Physics Services Corporation (GPSC) of Columbia, Maryland has developed a device for the remote long-term monitoring of full scale structures, such as highway bridges. This patented...
Twin Lakes Enlargement and Rehabilitation
The Twin Lakes Enlargement and Rehabilitation Project involves an enlarged embankment replacing a two-tiered reservoir system with a single, larger-volume reservoir and new appurtenances....
IVHS: The Invisible Revolution
Federal funding for intelligent vehicle highway systems has increased a hundredfold since 1989, from $2 million to almost $200 million. Transportation planners are looking increasingly...
Driving Under a Construction Site
Throughout the summer of 1992, vehicles passed unimpeded through one of the most heavily traveled intersections in Los Angeles County as construction proceeded on a concrete light-rail...
Development of the Planning and Control Segment, CRWMS Transportation System
This paper discusses the current plans for the development of the Planning and Control segment of the SRWMS Transportation System. Each of the four Planning and Control subsystems are...
Route Selection Issues for NWPA Shipments
Questions surrounding the designation of routes for the movement of spent nuclear fuel (SNF) and high-level radioactive waste (HLW) by the Office of Civilian Radioactive Waste Management...
Tolerance Requirements for Remote Handling at the Hanford Vitrification Project
A new and innovative approach to installation of the many remote nozzles and electrical connectors that must be installed to demanding tolerances has been developed by the architect/engineer...
NOISE?A Comprehensive Software Library for Highway Noise Analysis
The Noise Software Library is a collection of highway noise analysis software tools that are arranged together under a powerful file management system which provides a transparent method...
The Automation of Freeway Ramp Junctions Analysis
Congestion on urban freeways has been steadily increasing. In contrast, capacity expansion, by means of constructing new roadways, has not kept pace with the growth in demand. The primary...
Multiple Objectives, Uncertainty and Routing Decisions for Hazardous Materials Shipments
Explicit consideration of multiple objectives and uncertainty is important in hazardous materials transportation, particularly in regulating routes or making routing decisions. Application...
Simulation of ATIS Strategies to Mitigate Special Event Congestion
This research extends the performance and application of DYNASMART, a dynamic traffic simulation model which incorporates the three elements necessary for modeling traffic flow under information:...
Interactive Simulation for Modeling Dynamic Driver Behavior in Response to ATIS
It has been contended that in-laboratory experimentation with interactive microcomputer simulation can substitute for the lack of real-world applications and provide a useful approach...
Algorithms for Efficient Real-time Traffic Assignment
Fast algorithms are essential to accomplish real-time traffic assignment for optimal routing or traffic prediction under ATMS/ATIS. User-equilibrium and system-optimal traffic assignment...
A Real-Time Expert System for Freeway Incident Management in Orange County, California
This paper discusses the development of a prototype, multi-user, networked, real-time knowledge-based expert system (KBES) to provide decision support to California Department of Transportation...
User-Friendly Simulation Model for Traffic Networks with ATIS/ATMS
Implementation of ATIS (Advanced Traffic Information Systems) and/or ATMS (Advanced Traffic Management Systems) are proceeding in many cities around the world, but only very few frameworks...
Computer-based Building Design and Pedestrian-level Wind Conditions
Knowledge based computer system has been developed for the evaluation of wind conditions around buildings at pedestrian level. This paper concentrates on two major components of the system,...
Bellevue Smart Traveler: Phase 2
Traffic congestion in urban centers can be attributed to large numbers of workers traveling in single occupant vehicles to densely clustered downtown employment facilities. This project...
Return to search