Fibre Reinforced Shotcrete Case Studies of Wet and Dry Processes
Both wet shotcrete and fibre reinforced shotcrete are being increasingly utilised in the South African mining industry. This Paper describes two applications of fibre reinforced shotcrete...
Reinforced Shotcrete Linings as Part of an Integrated Support System Used in a High Stress Mining Environment
Shabanie and King Mines are situated in the Southern part of Zimbabwe, some 60 km apart and approximately 200 km east of Bulawayo. They are the largest underground operations in Zimbabwe...
Options for Dynamic Analyses of Underground Facilities
Continuum and discontinuum modeling techniques for conducting dynamic analysis of underground facilities of geologic repository are discussed. Compared with continuum analysis, the discontinuum...
Wind Engineering?Engineering for Wind Damage Mitigation
The establishment in 1970 of a new engineering discipline, wind engineering, was motivated by property damage caused by windstorms of 1970 known as the Lubbock Tornado and Hurricane Celia....
Full Model Wind Tunnel Tests for the Akashi Kaikyo Bridge
In order to carry out final verification of the wind resistance safety of the Akashi Kaikyo Bridge under construction, which has the largest main span of 1,990 m, its full aeroelastic...
Seismic Strengthening of Johnstown Tank in Lakeside, California
Seismic overturning moments exerted on liquid storage tanks may be resisted by a system of anchor bolts if the shell could be adequately anchored to its base, or by allowing the base plate...
Fluid Viscous Damper for Improving the Earthquake Resistance of Buildings
Experimental results are presented which demonstrate that the use of fluid dampers as add-on devices in moment resisting frames substantially increases damping and reduces seismic story...
A New Theory of Built-Up Columns
In laced, battened and other built up columns the shear stiffness of the web can have a significant effect on the overall buckling load. At the present time, such columns are analyzed...
QST Rolled Shapes, a New Generation of HSLA Compression Members
With the development of the Quenching and Self-Tempering (QST) process by the Luxembourg steelmaker ARBED S.A., a new generation of High Strength Low Alloy (HSLA) rolled shapes has become...
Preliminary Assessment of Fault Rupture Hazard at the Yucca Mountain Site Based on Expert Judgement
The judgments of seven earth science experts were elicited to quantify the uncertainties associated with the likelihood of fault displacement through the proposed repository at Yucca Mountain...
Numerical Methods for Fluid Flow in Unsaturated Heterogeneous Tuff
A numerical approach for modeling unsaturated flow is developed for heterogeneous simulations of fractured tuff generated using a geostatistical method. Cross correlations of hydrologic...
U.S. Nuclear Regulatory Commission Staff Technical Position on Investigations to Identify Fault Displacement Hazards and Seismic Hazards at a Geologic Repository
This paper outlines the guidance provided to the U.S. Department of Energy by the Nuclear Regulatory Commission (NRC) staff in its Staff Technical Position (STP) on appropriate investigations...
Radionuclide Migration to the Aquifer Through the Porous Medium
Time dependent doses of radionuclides from a waste container to the aquifer through porous medium are analyzed for (1) congruently released transuranic elements such as Np-237 and (2)...
Testing Models of Flow and Transport in Unsaturated Porous Media
The design of an intermediate-scale flow and transport experiment in an unsaturated porous media is described. This experiment will be conducted a 3-m-diameter by 6-m-long caisson filled...
Modelling Gas Migration Experiments in Repository
In response to concerns over the possibility of hydrogen gas generation within an underground repository for high-level radioactive waste, and its implications for repository safety, a...
Carbon Isotopic Data from Test Hole USW UZ-1, Yucca Mountain, Nevada
Rock-CO2-gas analyses in test hole USW UZ-1 at Yucca Mountain indicate that gas movement in the unsaturated zone is likely through a dry-fracture...
Role of Fracture Zones in Controlling Hydraulic Head and Groundwater Flow?Experience from Site Characterization Program in Finland
The preliminary site investigations for the final disposal of HLW produced by TVO have been carried out during 1987 - 1992 in five areas. All the areas consist of Precambrian crystalline...
Modeling of Strongly Heat-Driven Flow Processes at a Potential High-Level Nuclear Waste Repository at Yucca Mountain, Nevada
Two complementary numerical models for analyzing high-level nuclear waste emplacement at Yucca Mountain have been developed. A vertical cross-sectional (X-Z) model permits a realistic...
The Role of Fault Zone in Affecting Multiphase Flow at Yucca Mountain
Within Yucca Mountain, the potential High Level Nuclear-Waste Repository site, there are large scale fault zones, most notably the Ghost Dance Fault. The effect of such high-permeability,...
Studies of the Role of Fault Zones on Fluid Flow Using the Site-Scale Numerical Model of Yucca Mountain
The three-dimensional grid of the site-scale model developed for the unsaturated zone at Yucca Mountain was used to perform two-dimensional simulations with the TOUGH2 computer program....
Return to search