Into the Tunnel
Technological advances in wind tunnel testing and computer-aided design programs are enabling engineers to create taller and more aesthetically interesting buildings than ever before....
Testing the Load (Available in Geoenvironmental Engineering Special Issue only)
The Pittsburgh District of the U.S. Army Corps of Engineers recently began construction of a new gated dam to replace a nearly 100-year-old concrete fixed-crest dam on the Monongahela...
A New Skew
Most bridges that cross roadways or other elements at a skewed angle are designed based on right-angle crossings with inefficient modifications. A new concept for skewed crossings is a...
The Digital Evolution
As designers such as Gehry Architects dream up ever-more fluid and sculptural shapes for buildings, the only way to turn those aesthetic shapes into solid, safe structures is by using...
Wireless Warnings
Formwork failures cause dozens of construction-related deaths per year, but most can be avoided by adequate monitoring. The problem is, most monitors must be hard-wired to a computer on...
Taking a New Approach (available in Structural Engineering Special Section only)
The first bridge rehabilitation project in Washington, DC to use the AASHTO Load and Resistant Factor Design (LRFD) specification reveals several lessons to be learned from using the newly...
Tight Squeeze
The Newark, New Jersey Route 21 Viaduct Replacement is a massive, $250 million highway improvement program being undertaken by the New Jersey Department of Transportation. Michael Baker...
Smart Sign Support
The Route 80-MAGIC (Metropolitan Area Guidance, Information and Control) project is considered to be the showcase Intelligent Transportation System (ITS) project for the state of New Jersey....
Easing the Way for E-Permitting
In an effort to speed the development of an electronic permitting process in Fairfax County, Virginia, the firm Dewberry & Davis conducted a forum as part of a kickoff process....
Estuarine and Coastal Modeling
This volume contains the Proceedings of the 6th International Conference on Estuarine and Coastal Modeling held in New Orleans, Louisiana, November 3-5, 1999. The conference included oral...
Building Code Requirements for Masonry Structures (ACI 530-99/ ASCE 5-99/TMS 402-99), Specification for Masonry Structures (ACI 530.1-99/ ASCE 6-99/TMS 602-99), Commentary on Building Code Requirements for Masonry Structures, Commentary on Specification for Masonry Structures
Building Code Requirements for Masonry Structures (ACI 530-99/ASCE 5-99/TMS 402-99), Specification for Masonry Structures (ACI 530.1-99/ASCE 6-99/TMS 602-99), Commentary on Building Code...
Verdict Rendered
After the Grays Harbor County Courthouse in Montesano, Washington, was severely damaged by an earthquake in 1999, the surrounding community decided to preserve it. A design/build approach...
The Viable Alternative
The Benicia-Martinez Bridge is a high-level, welded deck truss bridge that carries Interstate 680 over the eastern end of the Carquinez Strait near San Francisco. To bring the bridge into...
Design Live Loads for Parking Garages
The objective of this research project is to obtain a better understanding of parking garage live loads and to recommend an appropriate value for design. A load survey was conducted in...
Evaluation of KeySystem I Retaining Wall
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report describes an evaluation to determine...
The Rationale for Above-Surface Facilities
The redevelopment of the U.S. Amundsen-Scott South Pole Station�currently in the beginning phases of construction�will include the largest and most ambitious example of an elevated station...
Defining the Manual's Audience, Content, and Level of Detail
Often, the technical writers assigned to prepare an O&M manual aren't technical writers at all, but members of the facility design engineering staff. While they may...
Desktop Publishing an O&M Manual
With word processing programs and high quality laser printers, it's easier than ever to create professional looking documents. The term desktop publishing refers to the production...
Producing and Maintaining an Online Manual
Most of us interact with computers on a daily basis. Every facet of our society uses computers to monitor and control plant processes. Documentation and training materials are produced...
Irrigation Method Selection Process
Intelligent selection of the irrigation method that best meets the goals and objectives of an irrigated agricultural development is of primary importance in the design process. A system...
Return to search