Numerical Simulation of Dynamic Shear Transfer
This study was focused on the dynamic response of concrete interfaces under the effects of impulsive loads, and the relationship between the interface shear transfer and the response in...
Pullout Testing of High-Strength Concrete Members
An experimental investigation of a high-strength concrete mixture was undertaken to measure and evaluate pullout and compressive strength properties. Two columns, a slab, and cylindrical...
Concrete Surface Characterization Using Optical Metrology
The displacement of the surface of a concrete specimen is measured as it cures using an optical method. This method, known as optical metrology, is one in which a line is projected onto...
Landfills: Anatomy of Automated Design
California's 360 acre Bee Canyon landfill (completed last year) sits amid a complicated network of narrow canyons with side slopes 300 ft high. As with most landfill projects,...
Automating The Corps
Automated soil testing machines solved several problems at once for the U.S. Army Corps of Engineers' South Western Division Laboratory in Dallas, Texas. The machines replaced...
Geomechanics of Subsidence Due to Pumping of Groundwater
In this talk we describe a nonlinear theory for the classical problem of pumping of groundwater from a layered soil. The model soil system consists of three horizontal layers where a very...
Adaptive and Parallel Methods for Nonlinear Solid Mechanics
The solution of nonlinear problems, which are of importance to industry and in scientific computations, requires increasing degrees of resolution. This high degree of resolution can be...
Bayesian Reliability Updating of Existing Steel Girder Bridges
Bayesian statistics is used to update the reliability of existing composite steel girder bridges. A 60 ft. long simply supported superstructure is considered. The reliability for the ultimate...
Wind Cross-Spectrum Effects on Long-Span Bridges
This paper discusses current analysis for long span bridge response based on wind components. The authors summarize the development of techniques which take such components into account,...
Wave Interaction with Fluid Mud in Rectangular Trench
Wave interaction with fluid mud in a rectangular trench is studied theoretically based on small-amplitude wave theory. The problem was formulated using the Voigt model for an viscoelastic...
The Effect of Wave Grouping on the Characteristic Wave Height
Wave data from two field stations and from the laboratory tests have been analyzed. The groupiness factor is used to categorize the wave data for the discussion of the correlation between...
Micromechanics and Effective Properties of Elastic Particulate Composites
A new micromechanical framework is proposed to investigate the effective mechanical properties of elastic particulate multiphase composites. Exact ensemble-volume averaged field equations...
On Distributed Processing Applications in Finite Element Analysis
Computer architectures may be classified by the relationship between their instruction and data streams (SISD, SIMD, MISD, MIMD) and the locality of memory (shared, local). Distributed...
Aspects of Parallel Processing in Reservoir Simulation
Vectorization techniques have proved to be extremely effective for large-scale reservoir simulations. Parallel capabilities hold even greater potential for these enormous problems. Domain...
Quantitative Stereology of Concrete Microcracking
Stereological methods enable extrapolation of quantitative microcrack characterization from two dimensions to three dimensional space. However, because these quantifying techniques are...
Behaviour of Prestressed Concrete End Blocks
This paper briefly reports on a series of experiments carried out on strip-loaded prestressed concrete end blocks. The results show that corresponding design methods presently used in...
Large Deformation Elastic Behavior of Low-Density Solid Foams
A strain energy function that describes the nonlinear elastic response of a three-dimensional open-cell foam is developed. A tetrahedral unit cell containing four half-struts that join...
Mechanical Characterization of the Soft Tissue in Horse Hooves
The laminar corium tissue of the equine distal digit (or horse hoof) has been tested uniaxial tension. The laminar corium tissue lies between the hoof wall and the underlying bone of the...
Nonlinear Behaviour of Schneebeli Packings
We present some experimental proofs of the influence of the disorder of contacts on the mechanical (non-local) behaviour of packings of cylinders. In particular, this disorder is responsible...
Use of Hierarchical Lattices for Predicting the Fluid or Stress Transfer in Concrete
Hierarchical lattices are used to study the influence of local disorder on the transfer of properties (stresses, strains, permeability) from the micro-scale to the macro-scale. They are...
Return to search