Gas Transfer and Secondary Currents in Open Channels
Laboratory flume experiments on water-wide controlled gas transfer, such as reaeration, are described. The experiments indicate that gas transfer is a surface renewal process, well described...
Chlorination of Wastewater Treated by Overland Flow
Results are presented from an investigation of the efficiency of three chlorination schemes used for the disinfection of municipal wastewater treated by overland flow. In experimental...
Water Erosion from Irrigation?An Overview
Erosion and sedimentation by water includes the process of detachment, movement, and deposition of soil particles (14). Under irrigated conditions, the erosive process is water flowing...
Reservoir System Simulation Through Network Flow Programming
A generalized reservoir system simulation model that makes use of a network flow programming technique has been developed for use in planning and operation studies of multi-purpose water...
Assessment of Drought Restriction Needs in New Jersey
Due to insufficient rainfall and related runoff during the spring of 1985, the Passaic and Hackensack River Basins in northern New Jersey and related storage reservoirs therein were able...
Classification and Behavior of Meander Migration
Meander migrations on the Mississippi River between Cairo, Illinois and Baton Rouge, Louisiana for the time period between the years 1765 and 1930 were classified into six categories based...
Management Strategy
Meanders of sinuous streams are often cut off by natural action or by man in order to improve conveyance or navigability. Cutoff bendways, as long as they remain aquatic, provide extremely...
Effect of the Fluid Velocity on the Biofilm Development
In order to get basic information concerning the application of a biological treatment to the ammonia nitrogen removal from drinking water, we considered the relation between the biofilm...
A Computer Model for Oil Slick Transport in Rivers
A computer model for simulating oil slick transport in rivers is presented. In the model the effects of advection, spreading, evaporation, and dissolution on the transformation of an oil...
Use of Stochastic Hydrology in Reservoir Operation
The Bureau of Reclamation is incorporating stochastic traces to provide a broader basis for management decisions during drought periods for the Central Valley Project in California. A...
Development of Two- and Three-Dimensional Modeling Systems for Open Channel Flow and Sedimentation
Two- and three-dimensional numerical modeling systems have been developed to address questions of open channel flow and sedimentation for the Corps of Engineers. These systems are complete,...
Physical Habitat Simulation and the Moveable Bed
One objective of an instream flow analysis is to quantify a flow that will maintain the existing channel and/or flush fine material from the bed. Five empirical approaches to determine...
Advancements in Aerodynamics, Fluid Mechanics and Hydraulics
The theme of these Proceedings is Advancements in Aerodynamics, Fluid Mechanics, and Hydraulics. As indicated by the title, the subject crosses disciplinary boundaries and deals with flow...
Available Compaction Equipment
When discussing available compaction equipment we must keep in mind the purpose of compaction. Compaction is the art of artificially increasing the density or increasing the unit weight...
Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...
Effects of High Pressure and Temperature on HCP
A modification of fabrication techniques for cement paste can significantly affect its properties. Specifically, the static compressive strength can be increased over that of specimens...
Ice Forces on Bridge Piers
The force that river ice exerts on bridge piers has been studied in the field and with models in the laboratory. Ice forces are a function of the strength, thickness, failure mode and...
Three-Dimensional Boundary Element Techniques for Moving Boundary Problems
The boundary element method (BEM) is a powerful numerical method well suited for a wide variety of engineering problems. The numerical computations are performed only on the boundary of...
Hydrologic Simulation for Reservoir Development
Potential changes in the Manasquan River basin hydrologic budget were assessed with the Hydrological Simulation Program in Fortran (HSPF). The HSPF results were used to assess the reliability...
Statistical Analysis of Tellico Dam Piezometer Data
The purpose of this paper is to demonstrate the use of statistical and computer processing methods as a tool for analyzing dam safety piezometric monitoring data. Statistical methods are...
Return to search